Treatment of slices parts and joints. Sections of the seams, the inside edges of podborov, obcutek the armholes, neckline, bottom of sleeves overcast. Side seams, the seams of the reliefs, sleeveless, seams, connection cuffs with sleeves handle on the strike-blanket stitch machines chain stitch type 408 CL.RLMZ, 51 PMZ cells with gap width of 0.4 - 0.8 cm For protection stretching shoulder seams are joined with a braid, a strip of cloth or edge on the machine chain stitch type 408 CL. RLMZ or lockstitch type 697 CL 97 and CL. OSL; joint width of 0.4 - 1 cm in the manufacture of goods for individual orders, joint width can be increased.
Grinding the flanges, collars, cuffs, vents, pockets and other trim details carry on a lockstitch machine of the type 697 cells. SLM; joint width of 0.5 - 0.7 cm
Processing boards. The collars can be processed with podborany, nastronie and stitched straps.
Processing boards nastronie straps perform as well as products from the tissues.
Side grind podborta with pads and without pads on the machines type 697 cells., 597 CL., CL. 97 ASLM. The grinding performed on the part shelves, landing from podborov on the cuffs and side shelves at the level of the clasp.
The seam allowance on grinding bead scribbled on the site of lapel (lapel) on the shelf, and the area side - podbor. The line is laid at a distance of 0.1 - 0.5 cm from grinding the weld bead.
In models with sharp corners and collars boards in the manufacture of products from thick Jersey fabrics it is advisable to prepare the sides, and then grinding the ledges, the positioning sections of the seam grinding side to side shelves.
Products in the clasp to the bottom of the lower ends of podborov grind on the bottom line bending (Fig. 117,a).
The seams of the top and bottom corners are cut, leaving a seam allowance of 0.2 - 0,S cm, side turn on the front side, straighten and priorivet, forming Kant on the cuffs of podborta in the direction of the shelves, and on the sides - of shelves in the direction of podborta.
In the sides with snap closure serged or obraznymi loops to buttons inside edge of podborov not attached.
In products with flaps with snap closure serged or obraznymi loops buttons inner edge of podborov in the area from shoulder seam to the first buttons or loops are attached with one tack in the middle of this plot.
In products with Velcro to the bottom inside edge of podborov scribbled down on ACC bottom, positioning the line at a distance of 0.2 - 0.3 cm from the inner edge of podborta (Fig. 117, b).
The top edge podborov bends towards the inside of 0.7 cm, was applied to the slices shoulder seams and scribbled at a distance of 0.2 - 0.3 cm from bent edge (Fig. 117,).
The edges of the boards can be decorated with lines.
When machining the sides double straps double straps or strips of the main cloth connect with the product on the machine type 408 or CL. RSL 51 C. PMZ, joint width, 0.4 - 0.8 cm (Fig. 118,a), departing from the bottom all of the boards at 4 - 5 cm, while the strap needs to be longer the treated side is not less than 1 cm
Lower ends of the straps bends 1 cm inside, tightly round their allowances for processing bottom products and pritachivajut the bar to the end side (Fig. 118,b).
The bar turn, the bottom corners of the seams primaqiune strips straighten, bent the ends of planks stitched by hand, making two or three stitches in 1 see
|