§ 5. О6работка upper edge skirts 
the Upper edge of the skirt may to be processed or stitched fold-over waistband, with grosgrain ribbon or seam itagiba (with hidden elastic). 

  Processing upper edge of the skirt grosgrain braid. Grosgrain ribbons are cut in accordance with the measure "poluobhvat waist" an allowance of 1 cm at the ends (for processing). For a uniform distributionlanding on the top edge of the skirt on the tape via the auxiliary patterns outline control chalk marks corresponding to the middle of the front and rear panels, seams and darting at the skirt. The ends of the grosgrain ribbon bend 1 cm and the markings on its lower part on a special machine sew metal hooks and loops (Fig. 92, a).
The prepared tape applied to the underside of the skirt (the size of the length 0.9 - 1 cm) and scribbled at a distance of 0.2 - 0.3 cm from the edge of the braid (Fig. 92,b), combining chalk characters with seams and Darts and at the same time investing half folded strips of special ribbon for the hangers. Put them sidefront cloth at a distance of 2 - 2.5 cm from the side seams.
Another edge grosgrain tape are bent to the front side of the skirt and is applied so that the edge of the braid was held flush with the first line of her felling and scribbled a second line at a distance of 0.1 cm fromregion. Bent the ends of the grosgrain ribbons stitched manually. 
Treated upper edge of the skirt priorivet, by bending grosgrain ribbons inside out and forming in the direction of the ribbon edge with a width of 0.2 - 0. see
In the manufacture according to individual orders upper edge of the skirt can be processed grosgrain band with double-folded (Fig. 92,). For this prepared grosgrain ribbons bend along the length in half, releasingone edge of the magnitude of 0.1 - 0.2 cm; the ends of the braid bends 1 cm inside iron crease and pulled away, giving the appropriate form. The upper section of the skirt put into the prepared braid, and primetyvajut so to the widest part of the ribbon located at the bottom and narrow was on the front side of the skirt. Nastraivanie perform at the narrow part of the tiea distance of 0.1 - 0.2 cm from its edge. Thread primitivne removed. Braid turn on the wrong side of the skirt tightly around the internal edge of the braid and forming the edging of the main parts of width 0,Z - 0.4 cm the Processed edge priorivet.

  Processing belt. Belt fold half lengthwise face inward, the adjustment sections, and grind the ends of the belt. Joint width of 0.5 - 0.7 see the Seams in the corners trimmed, sash turn on the front, seams and corners are correct, and products silk, woolen fabrics and fabrics of synthetic fibers priorivet (Fig. 93,a). In the presence of strip in the zone of fabric unilateral adhesive-coated strip applied to the inner side of the belt from the inside, aligning the top edge of the strip with the fold line belt and stick it on the press or iron.
A pad of proklamelin applied to the inner side of the belt from the inside, combining the upper edge of the strip with the fold line of the belt, and pritachivajut on a distance of 0.5 cm from the top edge of the strip. To the outer part of the belt pritachivajut the upper ends of the loops, placing them face down on the inside of the belt, and pritachivajut to the line of primaqiune passed along the intended crease line. After that, the belt loops are bent, closing the seam, and priorivet. Then the belt along the bend in the middleface inside and grind the ends of the belt and in the beltwithout a gasket. Belt priorivet and scheduled a test of the Cretaceous notch to coincide with the tucks, seams and pleats.
  The connection is a stitched belt with skirt. The treated zone of the inner part is applied to the underside of the skirt, equating sections, and pritachivajut, aligning the notch on the belt with Darts,seams and pleating the middle of the front and rear panels at the skirt at the same time investing hangers and straps (depending on model) face up (Fig. 93, b). In the presence of strip in the belt after primaqiune the waist to the skirt, the gasket seam carving (Fig. 93). Belt turn, seam folded in the direction of the belt, in the manufacture of products by individual orders seam iron. Primechanie straps folded inside of the belt and pritachivajut on the part of the belt at the line of bend on sanding the car. Belt slack on the front side, cut the belt and the ends of the loops to buckle inside 0.5 - 0.7 cm and scribbled on a distance of 0.1 cm from the bent edge to bent edge of the belt closed line of primaqiune the inside of the belt. If the lower ends belt loops are processed, they can be jotted and attached by hand with clips or small buttons depending on the model.
Belt in ready priorivet. In the presence of special adaptations for processing the top edge of the skirt waistband belt tuck in device, the upper section of the skirt is put between the two parts of the belt faceup and connect the belt with the skirt in one line with simultaneous ACC the inner and outer sections of the belt. This line is not adjusted for 3 - 5 cm to the ends of the belt. The ends of the belt zastrugivajut without fixture, turning the slices inside.