Linking or combining of technological operations (for the process sequence) to perform based on organizational from the technological feasibility, a rational sequence machining parts products, avoiding returns, i.e. observing the following requirements:

1. Perform basic and additional conditions of approval time-consuming operations.

2. To observe the sequence of operations. In the conveyor flow strictly in accordance with the sequence of processing and assembling products. Not allowed returns details perebrosa, etc. However, some minor details may be processed in order the sequence of their processing, and ahead of schedule.

3. To link the operation strictly according to the types of work: machine operations are completed withengine, manual manual, to ensure uniformity of work artist and make maximum use of the equipment. But not always fails completely to meet this requirement: machine operation sometimes have to Supplement the manual, to assemble in one organizational several specmachin operations; press operations assemble and hand Ironing (Ironing operation Supplement manual) and etc. it is not recommended to complete Ironing and pressingoperations manual along with performed with a needle. And flows great power can not link machine operations operations with a needle. To best use the equipment in the machine, specmachin, pressing and other operations 80 - 90 % of regular time should spend on performing operations on the primary equipment. When working on a single press run time of manual operations should not exceed the processing time of products on press. Works performed by sitting, it is impossible to complete with the work performed by standing, the Main machinesurgery you should not complement the manual or Ironing, which will require to complete the installation of additional jobs. Not it is recommended to assemble in one organizational machine operation and specmachin operation under which the worker should be rotated 180º, etc.

4. To assemble in one organizational indivisible operations are the same or related discharge, moreover, most of the time must have been run the operation of higher rank. This requirement provides a more full use of qualified personnel.

5. To strive for ensure that each operation is treated as a smaller number parts, which greatly increases the liability of principals for work performed and reduces the time to "take the item", "postpone detail", etc.

6. For greatest download stream working, performing the first operation, it is recommended not to weight work, and performing the last operation, overload (limits deviations).