After specification of products to fit customer all the updated lines lay the thread. The threads are laid along the line of bending the bottom of the product and the bottom of the sleeves, through the armhole and top part of sleeves, etc. 
To connect sleeve armhole outline thread of the control line at the sleeves and armhole products: at the highest point of the crown and the upper part of the product (in the products with offset shoulder seam), in places of the beginning and end of the landing or Assembly.
If necessary, the control lines are set on the bodice and skirt for the seam joints and in areas where the projected landing or Assembly one of the components. Length of the control line 2, see 
If the product is in the fitting has undergone significant changes, thread smachivaniya from the jointsremove and lay the threads at the seams, pleats and Darts.
By making minor changes in product design when fitting the product is folded wrong side inside, bending at the middle lines of the front and back and aligning the seams, tucks and pleats. After bonding of partsthe pins specify all the lines with the straightedge, ruler, chalk, pins or by stitching threads. Then cut the main parts, leaving allowances for seams, and cut out the piping of the neckline, bottom of sleeves andetc.
Depending on the skill of the cutter, and the shape customer and models the product can be made with one fitting. In such cases, after making the design changes, the product is passed in brigade or to the master for further processing, and in the manufacture of products with two fittings, the product is given to the crew or the master on training the second fitting.
In the preparation of the product to the second fitting smatyvay and sew tucks, folds, undercuts and seams on the planned lines. Process patch pockets, frills, ruffles and raised seams, loops, side zipper, collar, sleeve, waist and other parts. 
After processing, these parts and components smatyvay 6оковые and shoulder cuts, the bodice to the skirt (in products, cut at the waist line), zametyvayut bottom products umatyvaet collar at the neck, sleeves, armholes, namachivajut patch pockets and other finishing details on the basic.
Second the fitting of the product on the customer necessary for final clarification products. The product is put on the customer, clarify the balance finally products - the position of the shoulder and side seams, specify the neck width, and the length of the product. Finally clarify armhole of the product and the position of the sleeve in armhole. All updates produce the same as and at the first fitting. At changed the lines leading thread. 
The planned line is transferred on the second side of the product. For newly planned lines producesmachivanie and further processing of the product.