Processing belts.
 

When processing the belt-cord width 7 - 8 mm (Fig. 306 a,b,C) should the prepared strip of fabric folded face to face and sew on the machine stitch width 7 - 10 mm, then remove and priotity. The ends of the belt of wool and silk fabrics, to tie a knot or tuck inside for 7 - 10 mm.
Similarly, we can handle any belt width: it is folded along the face inward, bend one end of the inside-out for 8 - 10 mm (Fig. 307) and grind on the two sides, leaving the bent end of the raw. If the end of the belt included in seam, belt grind, without binding the end towards the inside. The seams, in corners cut. Belt turn inside using a long thin object. The end of the belt zastrugivajut at a distance of 1 - 2 mm from the edge. The belt can be treated with the help of edging.
 

To handle tabs, Pat, straps detail along the folded face inward and sew along the longitudinal direction, if both ends are seams or Darts. If one end is included in the seam or tuck, grind the other end and longitudinal sides.
Straps, PATA, tabs, snap buttons, grind on three sides, and if they consist of two parts (external and internal), then grind four sides, leaving a hole for turning with a length of 20 - 30 mm.
In parts of complex configuration of the seam in the concave areas netscout in the corners - cut, leaving up to lines 1 - 2 mm. twist Detail on the front side. Straighten the seams and priorivet, making edging width 1 - 2 mm towards the inner parts. The hole is sewn up by hand.
The end of the straps along the folded face inwards, and sew a seam width of 7 mm seam Allowance at the ends are cut and spread on two sides (Fig. 308). The end of the straps turn on the front side. The base of the formed triangle is attached by stitching across the belt at a distance of 1 - 2 mm from the edge, and in the products of cotton fabrics - stitching at the buttonhole loop (Fig. 309).
 

If the bib is lined (Fig. 310), fold it with the lining, right sides inside and sew the three sides in the lining, investing simultaneously according to the preliminary layout straps. The seam in the corners trimmed. Bib turn on the front side, straighten seams and priorivet from the strip.
 

If the sides of the bib are in the straps (Fig. 311), the allowance for processing the upper edge of the bend in nadechka inside out and scribbled with the ACC cut inside. The straps are stacked along the face inside and grind off the end of a seam width of 7 mm. the end of the turn, tuck the long side inside, smatyvay and zastrugivajut sheath / column, inserting on layouts bib with finished top edge. The width of the straps in finished form can be 30 - 40 mm.