Treatment of the collar and the neck. After processing, major components and connect the individual parts is procured collar (processing collars covered in detail in the section "Shirts") and stachivaya in the neck.

In the products of pull-collars connect with the neck using obrazek. Piping can be double or single, cut to shape of the neck or in the form of a strip of fabric at an angle of 45° to the warp threads.
 

Dresses with turn-down or pressing the collar facing the neck, shelves and backless fold with the product, right sides inside. Between the facing and the product put the machined collar (immediate and turn-down - face up) and grind the neck for the facing, equating sections (Fig. 319). If the ends of the collar located at the butt (Fig. 320), their pre-fasten four or five manual stitches or by car at a distance of 5 - 7 mm slices so that when further processing the stitches were not visible from the front side of the product. The seam allowance in the corners netscout.The facing folded to the inside of the product and priorivet, straightening Kant from the shelf. The inner edge of the piping attached to the shelf and the back of hand with hidden stitches.
 

For products made of cotton fabrics obtachku sew on the machine through stitching.

In the setting collar into the neck with double facing free edge piping scribbled on the product, positioning the line at a distance of 1 mm from the edge of the piping (Fig. 321).

When connecting the collar stand with the product of the lower collar is applied on the wrong side of the dress and stachivaya it from the bottom of the collar. The seam folded in the direction of the stand-up collar. Cutting cut the top of the collar bends inwards and scribbled at a distance of 1 mm from the bent edge, covering the stitching primaqiune the lower collar (Fig. 322).
 

The collar can be joined with the product and faster way. The dresses and blouses of any tissue, except legkopolirujushchiesja, the collar is folded with the product, right sides inside, the ends of the rack laid between the Board and podborta or allowance for processing fasteners and stachivaya collar seam width 8 - 10 mm. the edge of the seam allowance and then overcast and iron on the side shelves and back and secured to the allowances of shoulder seams.

Mouth products without collar handle pokrainini obrazkami or obrazkami, cut at a 45° angle to the warp threads. Fold the facing with the product, right sides inside and prostrachivajut on the facing (Fig. 323) stitch width 7 mm Stitch netscout in areas where further treatment it will tighten. The facing folded to the side opposite the product, the seam allowance scribbled on the facing at a distance of 1 - 5 mm from the weld grinding. The neck priorivet, forming the edging of the product. The inner edge of the piping attached to the product of a hidden seam.

For products made of cotton fabrics, you can grind the neck to the junction of the shoulder seams. In this case, the front and back obrazkami treated separately. Mouth products without collar can be treated with wood stains, banding. a strip of tissue with the formation of her edgings etc.