Handle the bottom. To handle the bottom of his stack, bending at the middle front and back, combining pleats, side seams, joints primaqiune skirt to the bodice and trimmed the bumps.

During the processing of a hem seam to the hem on the wrong side of the schedule line of the allowance for ACC. Then the bottom of the dress inside out and bend zastrugivajut with the ACC cut inside on the machine in products from cotton, flax, staple fabrics, products made of other fabrics with hidden stitches by hand.

In the models, strongly flared, bending the bottom is a minimum width to the bottom of the product well laid out.

During the processing of hem blouses, jackets stitched belt it fold inside out and sew, then turn on the front side, straighten the seam. The front side of the belt is folded with the wrong side of the product and pritachivajut on the car, equalizing the slices. The seam straightened out by bending him to the side of the belt.

Raw cut belt to buckle inside 7 - 10 mm and scribbled, positioning the line at a distance of 1 - 2 mm from the line of primaqiune the bottom of the belt (Fig. 330).
 

Final Assembly products are produced when connecting the bodice to the skirt. Fold the bodice to the skirt, right sides inside, aligning the side seams and non-core and grind from the side bodice seam width 15 - 20 mm.

If the dress ties at the waist, when connecting the bodice to the skirt at the level of the right side seam insert a loop of soutache or cord.

If the bodice has a clasp with podborany to the waist line, its the bottom pre-bonded. To do this, the right side of the bodice is put on the left, combining them in the middle, and prostrachivajut at a distance of 8 - 12 mm from the lower edge. If one of the parts with assemblies (bodice or skirt), the connection of the bodice to the skirt is produced from this details. Line offer on line education Assembly (Fig. 331).
 

In products with neotrazim bodice striped fabric for vrachevanie gum cut out of the main fabric with a width of 2.0 cm in warp or weft. The ends of the elastic bands connect the overlay seam on the machine. One edge of the strip bend inside out 10 - 15 mm, and then fold it up along the underside and inside prostrachivajut to the product according to the preliminary layout. When participarii one end of the strip comes to another 5 - 7 mm. straighten the Seam, a strip of cloth folded in the direction of the weld (Fig. 332), and scribbled with simultaneous insertion of elastics. Line have a distance of 1 mm from the edge.When setting elastic bands at the open circuit transverse sides of the strip to buckle inside for 10 mm. Then the strip is folded in the joint direction and pritachivajut to the product according to the markings. Rubber band is placed around the lines of primaqiune strips and attach the ends to the piece on the machine triple reverse stitching (Fig. 333). The strip folded and scribbled on the product, skirting the elastic band.
 

This operation completes the Assembly of the finished women's and children's dresses.

Final product finishing: it must be removed to break loops and sew buttons, hooks, etc.