9. Video at the top of the skirt made of woolen fabric with miaopinie the undercuts and flounced hem (Fig. 188). Construction of front and rear panels the same way, so this is only the front panel (Fig. 188 a). Instead of the tucks on the skirt clips, so the upper section is aligned. The amount of clips equal to the amount of Darts. On the panel put a line of undercuts. The skirt of this type may be longer in length is added to 3.0, see the Bottom part cut off. This line to the top and bottom and add 1.0 cm to the seam. Then build a flounce on the bottom part of the outline of the line cutting through 2 - 3cm cut, not reaching the upper edge 3 to 4 mm, and pushing the shuttlecock between the bands at 2 - 3 cm.The maximum extendable frill - side upper connection points. If the fabric does not ocenochnoe, warp yarn on the Shuttle can be positioned in any direction if the fabric in different direction has a different color, the warp yarn on the ruffle are combined with a warp yarn of the cloth and the details of the tailor in the same direction.
 

Join side seams of panels the side seams of the ruffles, flounces sewn to the panels, sew the zipper, lay clips, pritachivajut belt (belt length equal to the circumference of the waist +5.0 cm), the bottom hem of 1.0 - 1.5 cm greater ACC bottom is not recommended because the excess in the ACC can give a skewed bottom.

10. Skirt made of cotton straight to the top with clips at the waist and side ruffle (Fig. 189; Fig. 22 in the color inset). For the construction of the flounces (two identical parts) front and rear cloth fold on the side seam. Because the side seams have a seam allowance of 1.5 cm, lay both side seam (from the front and rear panels), put a line of podreza to flounce (Fig. 189 a). On the front and rear sheets through podraza add 1.0 cm to primaqiune shuttlecock. On the undercut of the shuttlecock plan a line of separation on 2 - 3 cm, flounce push 4 - 5 cm between the strips, remove the upper line, note which side goes to the front panel which to the rear.Because the back panel already, and part of the flounce, turning on the rear panel, less for the upper cutoff is given allowance for primaqiune line podraza. If there is no ocenochnoe fabric, the warp yarn on the shuttlecock can go in any direction, in the presence of ocenochnoe warp yarn on the Shuttle to combine with the warp yarn on the panel.
 

Join side seams of panels rautureau, podraza sew flounces. Seam primaqiune flounces can be stitched from the face, in this case, he bent to the side panels and the panels on 0.1 - 0.2 cm laid the finishing line. Sew the zipper at the waist lay the clips, pritachivajut belt, tuck and hem the bottom. In the lungs products the bottom can be processed with the seam in the hem, in the denser tissues of the ACC is 1.5 - 2.0 cm, pre-namachivajut bottom and inside storevault, then do a finishing stitch or sew cross stitches.