16. Skirt"barrel". Tight short skirt made of wool, expanded the thighs (Fig. 195). Consists of front (Fig. 195 a) and rear (Fig. 195 b) panels.

Video short skirt on the line going through the tuck, cut, laid down, at the top: slides back to the side seam SpryAssets, increasing the solution Darts at the waist line; which can be translated into several clips. In this case, instead of one tuck on each side obtained by the two clips. To achieve a more voluminous shape at the hips can be added (shown dotted) in this case increases and solution clips. For removing seam lines of the side, convenient when podlive, you should bend the panel along the line of bending, and only then make a lateral cut.The waist in this skirt needs to be wide, in shapes 12.0 cm, ready to see a 5.0 it is Advisable to do a hard gasket to the full width of the belt. Treatment of the skirt is the same as processing a regular straight skirt.
 

17. Double seam, flared skirt made of wool or "Scotch" (Fig. 196). Consists of two sheets (Fig. 196 a). In smooth fabrics warp yarn on the skirt is in the center, in plaid is on the bias. Seams are neatly pre-smatyvay - in smooth tissues they are arranged on the bias and the stitching can stretch in the cellular tissues when you need smachivanie to adjust the picture. Side seams together, sew a zipper, sew the waistband. Before hemming the bottom of the skirt should be pinned for the belt and give it to otvisetsya. Then from the line of protecive belt to align the ruler on the bottom line and then hem.Width of bending the bottom 1.0 - 1.5 cm. if the ACC more, the bottom must sucurity.

18. Chetyrehchastnaya the flared skirt of any fabric (Fig. 197).

Consists of four wedges (Fig. 197). Wedges connect a 1.5 cm seam, sew the zipper. Further processing similar to the processing of the skirt 17.