23. Skirt year-newsboy cap complex shapes from wool or cotton (Fig. 202). Consists of four wedges rear cloth (Fig. 199 b), yoke (Fig. 202 a), two lateral (Fig. 202) and two front wedges (Fig. 202 g).
 

The simulation is performed on the basis of the wedge the year of the skirt-vosmiklinka without side seams. First on the bed laid next four wedges output line of the yoke, the parts are cut and spread without a gap around the waist line, remove the yoke and give the seam. Then the wedges I and II move, so that between them there is no gap, and plan a line of podraza (Fig. 202 b). Through podraza put two check marks that are in the process of sewing must be covered. Derive new lines, side and front wedges, give the seam.

The processing sequence is: side and front wedges are sewn along the line of figure podraza, the seam iron up (you can lay the finishing line); sew the wedges for the front cut, the seam rautureau, wedges prostrachivajut the yoke. Join the four rear wedge, join side seams, stachivaya, the zipper, sew the waistband, hem bottom. When sewing this skirt require fitting to the exact shape lines.

24. Wrap skirt made of cotton or polyester (Fig. 203; Fig. 19 in the color inset).
 

Consists of the back (Fig. 167 a) and the two front panels (Fig. 203 a). Outdoor edge front cloth and bottom cloth back treated facing. In Fig. 203 and the dotted line to take line piping, the form repeats the form of the open cut, the width depends on the diameter of buttons. The facing on the bottom of the cloth back straight, the width equal to obtachku on the front panels. The length of the belt for a 92-gauge 120Х10 see waist - clips. To on the front panels, the clips don't seem to fit on the bottom of them you can shift closer to the center a better place to determine on the fitting.

Processing sequence: obrazkami seam 0.7 cm handle open sides of the front panels and bottom of rear panel, connect the side seams: the seams of Priselci obcutek at the front and rear panel must be the same; rautureau seams, piping bend on the wrong side of the skirt with stitch finishing stitch along the edge of the skirt. The inner section of piping can be fixed manually blind stitch or stitches to the width obtachki consolidating its internal slice, perform the second finishing line. Fix the clips, sew the waistband.

On the right side of the skirt to the waistband and the cloth perform loops, skirt iron, sew buttons.