Models of women's and children's dresses
 

 Women's dress summer (Fig. 392). Size 158 - 92 - 100. The camp consists of forehand (a), mill of the backrest (b), the front yoke (b) yoke backless (g) and collar, rolling in the plot (d).
 

 Women's dress with sleeve "flashlight" (Fig. 393). Size 158 - 92 - 100. The camp consists of forehand (a), mill of the backrest (b), the front yoke (b) yoke backless (g), two sleeves (e), collar (e). The feature of the processing of this dress: first, connect the side seams mills front and back, then stachivaya sleeves, and only after that the whole top of the dress gathers and connects to the yoke.
 

 Girl's dress (Fig. 394). Size 92 - 98 - 60 (depending on the growth of the dress can be longer or shorter). Modeling children's dresses and obtaining a traditional national forms shown in Fig. 395.

After the construction drawing design according to Fig. 394 on the paper is transferred back, and the shelf separately (in the region of the side seam parts cut teeth to get the side seam of each part). On the back put lines the yoke and if necessary cut lines mill (Fig. 395 a). The yoke cut, on the middle slice. Give allowance for the zipper on the back (3.0 cm in width), the allowance for primaqiune yoke to the camp - 1.5 cm in the Lower part of the back - mill - cut along planned lines, not reaching the top 1.0 cm, each part spread on 3 - 4 cm in the middle along the fold to give allowance for the Assembly 4 - 5 cm.For primaqiune and connection of the mill with a yoke give an allowance of 1.5 cm (Fig. 395 b).
 

On the shelf put a line yoke and lines for sliding the bottom of the shelves, if you want to not only prisorine, but flared dress (Fig. 395). The yoke on the shelf cut, giving allowance for the seam 1.0 cm. Bottom shelves - mill - cut along planned lines, not reaching the top 1.0 cm, at center of shelves leave allowance of 4 to 5 cm in the Assembly, in places cut mill shelves pushing into 3 - 4 cm for rasciesa, in the area of connection with the yoke seam allowance leaving a 1.5 cm (Fig. 395 g). In a similar way or as described in the section Modeling a light dress (Fig.361,g), can be obtained from any simple base form of the traditional national dress. Due to the fact that the camp consists of straight panels, the fabric pattern remains integral, that makes the dress extremely elegant, especially khanatlas. Dresses straight cut at the yoke is good for any figure.
 

The peculiarity of the national silk fabrics are fragile dyeing, large shrinkage and friability of the slices. Therefore the dresses made of Khan-Atlas is recommended not to wash to give to chemical cleaning. Fabric Khan-Atlas - bright, elegant and unique pattern - requires a lot of attention when cutting. When using Han-Atlas in unconventional elegant products prefer as little as possible to divide (cut) the fabric for the preservation of the unique pattern. Khan-Atlas is available-width 0.52 m; 0,65 m; 0.80 m. depending on width of fabric using various types of layouts.A prerequisite for the cutting of the national dresses - the fit of the pattern. When cutting the dress from a wide fabric (Fig. 396) mill transfer and mill back can occupy the entire width of the fabric and placed in the center of the picture. If desired, you can enhance Assembly on the top of the mill and not to cut in this case, the edge of the fabric. In larger sizes, on the contrary, the Assembly can be reduced depending on the width of the fabric. When cutting must be respected and the symmetry of the pattern on the front yoke, the ends of the collar, on the sleeves.Mill the front of the camp and the yoke of the back pattern should be centered and preferably in the same direction. Since the adjustment of parts when cutting requires a large amount of tissue, in one layout with the dress could be envisaged and the cut of the trousers-lozim.
 

When cutting narrow Han-Atlas mill dresses may not consist of two parts (front and back), and consists of three parts: mill the front and two side mills, passing to the back with a seam in the middle back. In this case, the adjustment pattern for all smachiwausa parts of the mill (Fig. 397). If the sleeve is not enough width of fabric, the sleeves can be staggered with extensions. In Fig. 397 shows connection details.
 

Processing of national dresses is similar to the treatment of female lung dresses. Features are the fit of the pattern and treatment of coquettes on pocketkai. If the Basque is without shoulder seams, sobranny mill can be placed between the yoke and PocketDay (Fig. 398 a). Traditional is the next processing coquettes: sobranny mill primatives to the yoke seam is directed toward the yoke, then from within podgoricka primatives manually hidden stitches (Fig. 398 b). It is desirable that this seam was clean.Sometimes folded twice Flirty with pocketcas pritachivajut to the camp and then obmenivaetsya. However, this technology can give a negative result in the socks: the fabric is loose and the seam may peel off together with the sheath.
 

Hem the sleeves and bottom of dress hem concealed stitches manually (Fig. 396). In national dresses of cotton bottom can be processed end-to-end stitching machine stitching thread in the fabric color.

In recent years, many national fabric used for dress goods, reversing the traditional idea of their purpose. So snipe has always been considered a purely masculine fabric. However, now beqasams offers elegant women's and children's suits and dresses, jumpsuits, jackets.

Khan-Atlas is most often used for sewing blouses combined with velvet, velour skirts or trousers. It is a combination of Sunny Khan-satin with a matte sheen the pile of fabrics has a long tradition, when elegant costume of Uzbek women consisted of Khan-satin gown and plush or velvet vests.