The lower collar is connected to the product patch seam.
To connect the lower collar jacket with patch on the bottom seam of the collar with the chalk outline of the control line and on the shelves and the back - line for applying and felling stands of the lower collar. The line on the neck is applied from the front side parts of the mold at a distance of 1 cm from the cut edge of the neck.
The lower collar is applied to the intended line, combined its middle seam with the middle of the neck back and umatyvaet in the neck patch seam straight stitches with a length of 0,8 - 1 cm, beginning from the middle. The line lay on the bottom collar of thread in the color of the main fabric at a distance of 0.3 - 0.4 cm from the edge of the rack.
After matiwane lower collar scribbled on a machine zigzag stitching: on the shelf - along with a side strip on the back with planted under her strip of cloth (Fig. 58). The ends of the edges along the breakline of the lapel is fixed at the casting seam of the collar, and four or five manual stitches.
The lower ends of the collar if it is quilted on a special machine applies a strip of nonwoven fabric or cotton fabric, closing the seam Tachibana, and attach it on the machine blind stitch or hand straight stitches with a length of 1 cm at a distance of 0.5 cm from the slices of the strip. This is to ensure that the line does not lay on the upper collar.
|