To improve the appearance of your jacket and give it dimensional stability is produced, the duplication of shelves, sides of shelves and back, podborov, upper collar, flaps and leaves with adhesive materials, Parts from packing materials details of the main fabric 0.3 - 0.5 cm
Equity the thread to glue the parts should be held in strict accordance with the direction of the grain lines on the details of the main fabric.
Duplication of parts is carried out by wet-heat processing on presses with flat pillows, a large area and the processing nodes on presses with cushions, the shape of which conforms to the shape of the processed part of the product.
When connecting the strips with the basic details on the mobile frame of the press put the main part face down on their wrong side of the stack of strips of adhesive coating down. Parts pressed at a temperature of 140 - 150'S.
Shelves are joined with a glue strip over the entire surface.
The side cutting part of the shelves combined with the adhesive strip around the arm openings, at the location of the cut side pockets and hem; a strip at the bottom to navigate from the allowance for ACC, the positioning of the cut strip along the line of bending. Cutting the side parts can be connected with an adhesive strip and across the surface of the parts (Fig. 7, a).
Podbot in the upper part connect with the adhesive fabric so that the seam of the gaskets were included in rascepa seam and seam grinding side (Fig. 7, 6).
To protect the slices from stretching and to save the configuration construction lines of the back at neckline, hem, portion of the allowance for processing slots (Fig. 7) connect the strip on presses with flat cushions on the section of openings - iron, while retreating from the slices of the openings of 0.3 cm and Sturova formed by forming a slack of 0.5 cm
Top collar combined with padding, positioning her away from the slices stand and rascepa equal to 0.3 cm, leaving a 1.5 cm, at the ends of the edge strip is located on the line of bend of the ends of the collar (Fig. 7, g).
Valve gasket located at a distance of 0.3 cm from the slices (Fig. 7, d). Equity the thread of the strip should match with the shared thread of the main fabric.
Strip the leaves have a distance of 1 cm from the top and bottom sections and 1.5 cm from the lateral (Fig. 7, e). Equity the thread strip is located along details.
|