SARAFAN

Sarafan (Fig. 229), cut at the waist, on the straps. Flared skirt gathered at the waist. Top of bodice is trimmed with bias ruffle. Back the sundress buttoned closure, side Darts sewn into the waistband and tie back bow. The bottom of the skirt can be finished with colored braid. The fabric is cotton.

Lines cut and prepare patterns

To prepare the pattern of the bra (see Fig. 212). For this pattern to apply a line style bodice dress.
Bodice. From point T to postpone up to 6 cm (Fig. 230, a). To connect with a straight line point b and G4. This line is split in half and the points of division to postpone 1 cm down From point 4 (at the waist) to defer up to 6.5 cm

From the neck down the middle of the front to delay down 4 see Connecting straight line of points 4 and G4. This line is split in half and the points of division to defer up 0.5 cm Point b,5; b; 1; G4; 0,5; 4 to connect a smooth line - line style.

The line style from mid front and mid back to be postponed for 3 cm, and these points connect with a straight neck. From points 3 to defer the width of the straps 4 see

Hold the line straps, as shown in Fig. 230.

For prisalivaya bodice to build a tuck at the waist with a depth of 2 cm.

The construction of the skirt. Draw a right angle with the vertex A (Fig. 230, b) with sides of arbitrary length. From point A draw a line, dividing the angle in half. In straight lines from point A to postpone for 35 cm (1/2 semicircle waist plus 20 cm for Assembly and seam allowance on the clasp): 30 : 2 + 20 = 35 cm.

Point 35 to connect with a smooth curve, which will waistline. From points 35 to delay down the length of the skirt is equal to 25 cm, plotting points to connect a smooth line parallel to the waist line.

The vertical lines outline the middle of the front. From the horizontal line to postpone down 4 cm for processing fasteners and from point 4 down to 2 cm for the clasp. From point 35 to defer to the right 0.5 cm and the points 0.5 and 4 to connect a smooth line. Outline loops: the first one below the top of the bodice by 1 cm, the other - at a distance of 4 - 5 cm from one another.

The construction of the belt. Draw the rectangle ABC (Fig. 230 in).

The horizontal line of the rectangle is 40 cm, vertical - 8, see Defer from point A down 2 cm from point B to the left of 4, see Points 2, 4, G connect the straight lines.

The training patterns. The pattern of the bodice is cut on the line of the cut. The skirt pattern to cut along the contour of the waist and the bottom of the skirt, and the pattern of the belt along the contour lines.

Layout and cutting

The fabric is doubled by a transverse filament (Fig. 231). Put the middle of the front skirt to the fold of the fabric, the bodice - mid front - at the common thread to the bend of the fabric.

Other parts with the seam to put, as shown in Fig. 231.

Tailoring

Sew ruffles. One side of the ruffles to process on the machine narrow hem or stitch edge stitching. Sew the side Darts in the bodice, inserting the belt.

Frill to collect on a thread twice the width of the upper edge of the bodice. To the front side of the bodice to attach the reverse side frill, its exactly on the top edge and tack, evenly distributing the Assembly (Fig. 232, a). For the ruffle, attach the front side straps are to the planned places. Face put Podkayne bake at frill and straps and tack to seam allowance for the zipper. This allowance of remove on the face, covering them with a ruffle, and Podkayne bake together and to stitch on the machine (Fig. 232, b). Bake turn into wrong side, tack on the edge, bend and hem (Fig. 232,).For the clasp on the bodice is to sew hooks or buttons.

The skirt at the waist to collect on two lines. The gathered skirt to tack the bodice to make sure the middle and the transition to clasp the skirt coincided with the middle and transition to closure at the bodice. Waist line to stitch. Neaten the seam over the edge. The bottom of the skirt to sew a narrow hem on the machine.

Loop to prometti. Sundress ready to be ironed.

CHILDREN'S APRON

Children's apron (Fig. 233) it is possible to sew from thick cotton and linen fabrics.

Lines cut and prepare patterns

The pattern of the apron to prepare the basic pattern of the dress (see Fig. 209) with an open back. Line side to leave a straight line Г4Н2 (Fig. 234) without braces.

For this pattern to apply a line style of apron.

To defer from the neck to 3 cm along the middle front and shoulders. Both points 3 to connect a smooth line.

From point 3 on the line of the shoulder to defer the width of the straps are 4 cm and divide it in half. From the points of division to defer up at a right angle 2 cm (clasp). To connect the smooth line of points 4, 2, 3. From the point G4 to defer down direct 4, see to Connect a smooth line point 4 from point 4 on the line of the shoulder.

Through the middle of the front from point 3 to postpone the length of the apron - 40 cm From the point 40 to the extension of the apron to hold the right line length of 3 cm and place the point N, which connect a straight line with a point 3. Through the side from point 4 down 22 to postpone, see to Connect a smooth line of points, N, 40, 22.

From Rostock to postpone the left, 3 cm. to Connect the smooth line of points 3 and 4 (on the line side). From point 3 on the line of the shoulder to defer to the left the width of the straps are 4 cm and divide it in half. From the points of division to defer up at a right angle 2 cm. to Connect the smooth line of dots 3, 2, 4, 22.

To build pockets from the waist line through the middle of the front to defer 5 cm down From point 5 to hold left a straight line of length b, see point 5 to defer down the line to the middle of the front height of pocket 8 see Connect a smooth line point b and 8.

Cutting and tailoring

The fabric is doubled at the common thread (Fig. 235). Line the middle of the apron and pocket to put towards the fold of the fabric. Pocket single. To find oblique bakey 2 cm wide.

Oval sections of apron with bias binding oblachat of finishing of fabric on the front side of the apron. The width of the piping in finished form 1 see

Oval cuts of the apron can be tied with colored thread.

The upper section of the pocket processing as well as the contour of the apron, the side sections to bend inside out and stitch along the edge.

Sweep loops and sew on buttons.