COSTUME SKATING 

Costume for skating on skates (Fig. 314) from soft wool or velvet, blue color, gray silk lining. The bodice is form-fitting, stand-up collar cap. Zipper back with "zip". The bottom of the bodice is decorated in a teeth. The flared skirt is cut in eight wedges. The bottom of the skirt is trimmed with a scythe the bake of lining fabric and embroidery in the color of the borders. The sleeves are narrow casting, oblique cut for more free movement. 
To suit recommended with gloves and beanie in the color of the costume or decoration, wool tights in color tan.

Lines Cut and prepare patterns 

To prepare the adjacent main pattern of the dress (see Fig. 97) to the waist, Darts at the waist line not to outline. To prepare the pattern narrow sleeve (see Fig. 84). The pattern to apply a line style.

Back. From Rostock to defer down the middle of the back 20 cm (Fig. 315, a) for vrachevanie "lightning" and put a stamp. A line mid back continue up to 4 cm From Rostock on the shoulder line to postpone 1 cm, from point 1 - up 3 see Point 3 connect smooth lines with dot 4 and shoulder line.
From the armhole at the shoulder line to postpone 4 cm, and from the point 4 - left, 1.5 cm Line of the side seam to translate to the right by 2 cm Line the waist is split in half and the points of division to be postponed left and right 1.5 cm (depth tuck) and put the points T2 and T3. 
Point T2 to connect with point 1.5 to the shoulder line with a straight line. Point T3 to connect the point 4 a smooth line, as shown in Fig. 315.
From the line the waist down to build two equal tines. Cut ТТ2 split in half, from the points of division drop equal to half the line ТТ2. The end of the perpendicular connecting points T and T2 are straight lines. Second tooth build in the same way as the first. 
The line terminations of the skirt to the bodice at the middle of each wedge has a notch corresponding in size and shape to the teeth of the bodice. 
For the drawing pattern of the skirt is built one wedge, which cut all the rest.
To build the wedge from the points of division to hold down vertical line equal to the length of skirt is 38 cm, and put the H-point. Through the point N to the left and to the right, draw a horizontal line on which to postpone the width of the wedge, equal to the width of the prong (T3 2) multiplied by 4. In this example, the width of the the prong is equal to 9.5 cm. Therefore, the width of the wedge at the bottom will be: 9.5 x 4=38 cm
From point N to delay left and right at the 19 cm and put points N1 and N2, which connect the straight lines with points T3 and 2. At the sides of the wedge to defer the skirt length and to put the points H3 and H4. Line the bottom of the skirt to hold through the points H3, N, H4. 
Before. The middle front to last up to 3 cm (Fig. 315, b) and from point 3 to be postponed right 1 cm From the neck at the shoulder line to delay 1 see 
To build a stand to be postponed from 1 up to 2.5 cm, from the point of 2.5 to the right - 2 cm Point 2 to connect with
shoulder line smooth line and point 1 - direct. Point 1 is connected by a straight line with the lower point of the neck. 
From the armhole at the shoulder line to delay 4 see point 4 at the top of the shoulder to defer the depth of the chest tuck, to put the point P. 
From point T1 to postpone the cut ТТ2 (drawing back) and put an end T4, which is connected to point P by a straight line. From the point T4 to postpone left the depth of the tucks. 3 cm and 3 point to connect with point 4 smooth line, as shown in Fig. 315 b.
The line of the side seam to translate to the right by 2 cm From point 2 to the waist line to delay the second depth tuck 2 see the line of the side seam to hold from point 2 to the openings. 
From point 4 to be postponed at the tuck down 9 cm From point 9 to outline the pocket with a length of 10 cm, as shown in Fig. 315 b. 
From waist line to build two equal prongs, the same as on the back. 
  The training patterns. Cut the pattern along the lines of the design; tuck cut. Wedge cut skirt from the bodice. To number parts. Extra part patterns to cut. 

Layout and cutting

The fabric is folded in half with the fold in a transverse filament. The pattern to be as shown in Fig. 316; all details to carve out. 
Lining to carve out the same as the top of the suit. 

Tailoring 

The bodice with lining stitch the bridging stitch. From the inside to pritchet burlap pocket. Back in the middle back to vacate "lightning". Sew the sleeves and hem the bottom. 
Sew the wedges, the skirt, the seams resuturing. On a distance of 3 cm from the bottom of the skirt to pricecat the bias tape with a width of 2 cm Bottom skirts over bake and sew.
Skirt sweep with the bodice along the lines of teeth, to make the notch at each corner of the wedge. To stitch bridging stitch with the inside. Sew the lining to the skirt. seams to resaturate. To put a face to lining the top and pristroit at the bottom of the skirt. Lining remove inside out and attach it to the seams of the wedges. 
To process a rack of fabric for the top of the suit. To hem the lining to the sleeves. To vacate sleeves. To iron a suit.