SUMMER DRESS WITH CAMISOLE 

In Fig. 261 depicts summer dress with sweater. Dress cutting through the waist, with soft Darts, with a wide neck, short cap sleeves. The skirt is straight, narrow, front closure two-button, in the middle of the back and front skirt pleats unilateral. Blouse with large collar, set-in short sleeves. Clasp on one button. 

Lines cut and prepare patterns dresses 

to Prepare a basic dress pattern with cap sleeves. For this pattern 
to apply a line style.
Back. To defer from Rostock down in the middle of the backrest 4 cm (Fig. 262, a), and on the shoulder - 7 see Both points connect smooth lines. Waist have side to remove 1 cm from the hip line to hold down the vertical line to bottom line. 
Waist line divide in half and through the point of division draw a vertical line up and down 12 cm to Postpone the left and to the right of the points 12 by 3 cm, and from the points of division on the waist line at 2 cm. All points 3 connect the straight lines with dots 2 and the point of division, as shown in the drawing.
Before. From the bottom of the neck in the middle front to delay down 4 cm (Fig. 262, b), and from the highest point of the neck at the the shoulder line - 7 see Points 7 and 4 to connect a smooth line. From point 4 to defer on this line 1 cm or down 3 see Point 1 and 3 connect a straight line.
From openings through the sides to delay down 3 cm point 3. hold right horizontal line of length 9cm - linetransfer breast tuck. Point 9 to connect with the top points Darts at the shoulder line. The left side of the tuck to align on the right and the tuck end to connect with the endpoint sleeves. Waist have side seam to remove 1 cm From the hip line to draw a vertical line to line the bottom of the dress. Waist line to divide in half and build soft tuck like the back.
For fasteners from the middle at the front lines the waist and hem to defer to the right 2 cm Point 2 to connect direct line. Outline two loops from the waist down at a distance of 12 cm one from another. 
Training patterns dresses. Cut the pattern according the waist line. Close a breast tuck, transfer it to the line side. Cut the extra part of the pattern. 

Lines cut and prepare patterns blouse 

to Prepare a main pattern of the dress to the waist and main pattern sleeves. For a pattern to apply a line style.
Back. From Rostock on the shoulder to defer 3 cm (Fig. 2B3, a). Point 3 to connect a smooth line from sprout. 
Before. From the neck on the shoulder to defer 3 cm (Fig. 2B3, b). From point 3 on the shoulder line draw a straight line equal to 11 cm From the point B2 to hold construction line length of 13 cm, dividing the angle in half. This line from point 13 to defer to the right 3 cm and up 1 see Connect the dots 11 and 1smooth line and the points 1 and 3 with a straight line.
From point B1 to delay down 17 cm clasp from point 17 to defer to the right 6 cm. Points b and 13 connect with a straight line. Waist from center front postpone left 4 see Point 4 and connect b to a straight line. 
For build crest line of collar connecting straight line of points B1 and b and on this line cross the pattern. To obtain the contour of the collar to the right of the line of intersection translate the cutter circuit B1, 11, 1, 3, 13, b, B1. Then the pattern to deploy and the copied line to circle pencil.
From point 11 at a right angle to interval 11 - 3 to draw a line with a length of 7 see Point 7 and to link 3 with a straight line. From point 3 carried by line to delay the sprout length of 10 cm From a point 10 a perpendicular is erected with a length of 17 cm (width of collar). Point 17 to connect a smooth line with the planned contour of the collar. 
For this style podvorotni cut out separately; therefore, it is necessary to hold cut the collar a straight line to the point B2, point 3 - straight to neckline. Then podvorotni transfer on transparent paper and cut out.
A second tuck at the waist to increase by 1.5 cm due to the depth of the first tuck, lengthen 3 cm 
to transfer to the line side. At the side seam at the waist to remove 1 cm. 
Sleeve. On the middle line of the sleeve to defer down the sleeve length is 30 cm (Fig. 263,). Lines the seam of the sleeve to remove 3 cm For the ACC to postpone from the bottom of the sleeve down 4 cm Line of bending to make out, as shown in Fig. 263, V. 
preparation of the sewing patterns blouses. A tuck at the waist to close and cut along the planned line. Cut the extra part of the pattern. 

Layout and cutting

The fabric is doubled at the common thread (Fig. 264). The middle of the front and back of the blouse and the bodice of the dress 
to put common thread. From the fold of the fabric to defer 10 cm for the counter-folds, and then put the middle of the rear cloth skirts. From the fold of the fabric to defer 5 cm for a fold and put the zipper edge of the front cloth skirts. 
The layout of the rest of the details and seam shown in Fig. 264. All the details to carve out. 

Tailoring 

Training to the fitting and the fitting are presented on pp. 258 - 265
Dress. Sew shoulder seams of bodice. Processing podkralas the facing neck; sew side seams. Soft tuck stitch on the bodice and skirt from the waist line by 2 cm to Handle the bottom of the sleeve facing. To stitch the side sections of the skirt, hem hem, to oblachat loop. To pristroit skirt to the bodice. Sew on buttons. To iron.
Top. Sew the tuck, side and shoulder seams. Sew podvorotni to neckline. To pritchet padbolt with a collar. To oblachat loop. The bottom of the blouse podkralas hemming the facing, tack and pristroit. Processing and to vacate sleeves.