Start sewing with the production drawing for the pattern. Calculation make on withdrawn standards. Apply a contoured line drawing to the pattern according to the rules of magazine design for illustration. Shorts length at the side seam shall be 58 see

For this model (Fig. 129) you will need 1.3 m dense fabric width of 1.5 m, interlining "steelbound" (strip belt) of 0.8 m and a width of 6 cm, adhesive cloth strip, prosa (strip of cloth with openwork in the middle) length of 1.6 m and a width of 1.5 cm, and 10 buttons.

Prepare details of patterns from the drawing basics and number them:

I — front half — 2 details, burlap pocket — 2 details;
II — rear half piece with the burlap pocket — 2 details, valve — 4 parts;
III — back yoke, single cut with the burlap pocket — 2 details;
IV — the fly (strap to zipper) — 1 folded detail;
V — belt length 76.5 cm (3.5 cm allowance under the clasp), width 12 cm, finished 6 cm;
VI — 2 front belt loops each length of 8 cm, one back belt loops 10.5 cm and width 7 cm, ready — 3.5 cm (each belt loops).

Lay out the details of the patterns on fabric and vykroyte given the seam (Fig. 130). Vykroyte for a hem allowance width of 6 cm in the Right and left sides of the clasp have different cut lines.

Allowances are not cut out along the front edge of the cap neskowin pockets rear halves along the edges of the front yoke, along the edges of the front halves, labeled "right side" and "left side". Parts shaded in the drawing, strengthen the gasket. Vykroyte strip for belts without a seam. Put it on the reverse side on the outer half parts of the belt.

Sew Darts to shift masculino pockets. Witchita valves on the outside and attrocity. Prometiste loop in the marked places. Baste the valves to the upper cut rear halves. Sew yoke to the back halves. Without interrupting the stitching, sew burlap pockets. Will attrocity yoke along seam primaqiune. Sametime pleats on the front halves. Witchita the entrances to the pockets masculine and attrocites in the region at a distance of 0.75 cm sew the Side sections below the entrances to the pockets.Put on cap burlap pockets front half, this will align the pocket with the marked on the sacking line. Sew burlap to each other from the wrong side and baste them to the front halves.

Will attrocity front halves along the seams. Sew the stepper sections and then the front middle seam of the label cut, little short stepping seams. Shift the facing of the slit and the allowance under the clasp zautyuzhte on the appropriate lines on the wrong side and baste. Will attrocites in the region of the bends of the section. Fold the buttonhole in half lengthwise wrong side inwards and baste the slices. In the marked places prometiste loop. The fly is placed under a right half and baste. Sew the buttonhole. Will attrocity right half along the marked lines along the slit. Cleave the slit.Sew the buttonhole and the seam allowance under the zipper to the right side. Will attrocity right half of the shorts at the bottom of the cut obliquely.

Fold loops in half lengthwise. Pure witchita longitudinal sections on the front belt loops. Witchita one end of the front belt loops area. Will attrocity belt loops. Prometiste loop watchnow area, at the end of the back belt loops. Baste belt loops front to front halves, put them on top of the folds. Sew the seam allowance under the clasp of the belt of the shorts to the allowance under the clasp of the left halves of the shorts. Then to top slices short pristrochite zone.

Fold the waistband in half lengthwise and witchita front ends. Details belt with tucked inner halves, sew into the seam primaqiune and attrocity. Sew back middle seam up to upper edge of the belt. Loosen up the front belt loops, tuck them in and sew to the top edge of the belt.

Put below the rear middle seam of the front belt loops to vaticanii area the end of 4 cm went over the seam protecive belt on the rear half of shorts. After this pin to waistband rear belt loops. Tuck and sew the straight end of the rear belt loops to the upper edge of the belt, and the lower end of the seat to the back seam on the button.

Fold allowances on the hem to wrong side and baste. Cut provu into two equal segments. Remove the woven edge of prosby on the wrong side and priutyuzhte.

The leg opening of the shorts from the front side pristrochite provu like finish. Prometiste one loop on the right side of the incision closure in the marked place. Promatyvaya the loop, grab the fly. Prometiste three loops on the right end of the belt.