Such a skirt (Fig. 80) can be made on the basis of a classical direct skirt. Trace main pattern front cloth unfolded. Apply to contour line of the hips.

Swipe from the bottom to the left end of the tuck line cut, parallel to the line of mid front cloth (Fig. 81). Number the details.

Classic mini skirt with side pleat is better to sew of denim or any other dense material. If fabric width is 80-90 cm, take two lengths of skirt and 12-20 cm In width 130-140 cm, you will need one length skirt plus 6-8 cm

First and foremost, you need to calculate enough fabric to fold (it is necessary to leave from 12 to 16 cm). Find the difference between the width of the fabric and full hips with a full increase to free fit a 140 (POB + PB) x 2 = 140 – (53 + 2) x 2 = 30 cm.

If the remainder is less than 8-10 cm, to sew such a skirt is not worth it.
 

Fig. 81. Drawing shapes lines straight classic skirt

Lay the fabric wrong side up. Aside from the edge a distance equal to half depth of pleat plus seam allowance (1-1. 5 cm), and draw a vertical line. Cut the pattern along the line and attach the first part to the line on the fabric (Fig. 82). Circle the item and continue with the hips over the fabric. The side cut of the first part will include a detailed pattern of the cloth back, the hips should be aligned. Draw around the pattern and attach it to the side cut of the second part of the front panel.To the right of it on the hips will delay the allowance of half the depth of the folds and at the seam.
 

Fig. 82. The layout pattern on fabric and cutting a straight classic skirt

Reduce the depth of folds along the hem of 1.5–2 cm on each side. With a ruler connect the points 1.5–2 cm with the hips and will continue this line (fold crease) to the waist line.

Make allowances for seams and hemming the bottom. Then treat the product.

If you want mini skirt was more strict, we can make the cut not the side and rear.