For sewing coveralls 46-48 size you will need suit or other thick fabric with a length of 230 cm and a width of 150 cm, lining fabric in a cage (lining the upper part of the overalls), 6 buttons, 2 carabiner without peg (Fig. 106). The pattern of the Romper , you can build on the principle blouses kimono, that is, combining the pattern of the pants and the front and rear of the shelves. Take a large sheet of paper on top, place the pattern front halves of trousers and shelves. The same run with the rear halves of the trousers and shelf. Patch pocket make the desired size.

Prepared pattern lay out on fabric.

Layout of patterns on cloth

Fabric fold face inside and fold in half. Will determine the direction of the grain lines. After the cutting of the product should be the following number of parts.

Main fabric:

— front half pants — 2 items;
— the rear half of the pants — 2 items;
— back — 1 folded detail;
— shelf — 1 folded detail;
— halter — 4 parts;
the back pocket facing — 4 details.

Lining fabric:

— back — 1 folded detail;
— shelf — 1 folded detail;
— burlap back pocket — 4 details.

The processing sequence

1. Lay pleats on the front halves in accordance with the direction of the arrows and Sametime them.

2. The straps are purely witchita and attrocity for vaticanum the edges in the edge at 0.7 cm sew Straps to the back.

3. The front and the back clean witchita lining for the upper sections.

4. Sew Darts at back halves.

5. On the rear halves of the pants follow, and Welt pockets in the frame, the inner side of a rear half priutyuzhte markup on top of the pocket strip strip width of 4 cm, Two piping pockets with fold back half right sides, pin on a marking along the entrance of the pocket and sew, drawing attention to the fact that longitudinal sections of obcutek coincides with the line marking the middle of the pocket. The rear half along the slot between stitches, diagonally to the ends of the lines. Make sure, not to damage the piping. Allowances of seams Ratatouille.Remove the piping through the grub on the wrong side to make a neat frame, baste. The burlap pocket on the reverse side of the back half put on the bottom of the facing, giving the burlap up, with the front side facing the lower pristrochite the seam primaqiune, grabbing the burlap. Burlap zautyuzhte down.

Further, with tucked seam allowance of one of the long sides of the skirt, Topstitch the valance on the second burlap back pocket. The second burlap on the reverse side of the back halves put on the pocket and on the front side pristrochite in the seam of the upper piping primaqiune. The small triangles at the ends of the grub screw off on the wrong side and pristrochite to obtachku exactly from the ends of the top line to the ends of the bottom. Burlap trim, equating, and sew.

6. Sew middle front and middle back seams, not reaching 5 cm to the plotted lines of the stepper seams.

7. Shelf sew to the front halves, back — to-back.

8. Sew the side seams below markers of the slit for zipper. Cap piping zippers and allowances under the clasp loosen on the front side and pristrochite to the upper sections of the front halves. Piping and the allowances for the upper sections of the front halves Unscrew on the wrong side. The front half will attrocity: along the side of the buckles, the edge at a distance of 4 cm along the upper edges — the edge at 0.7 cm Rear halves will attrocity along the edges of allowances under the side zipper, the top edges in the edge and at a distance of 0,7 cm.

9. Sew step seams and the remaining portion of the middle seam.

10. Allowance for the bottom hem fold on the wrong side, tuck and pristrochite on a distance of 3 cm

11. On the shelf sew two buttons, straps insert in the carabiner, adjust the length and lock.

12. The clasp is sewn loops and sew buttons.