To construct a drawing of this model (Fig. 83), trace the main pattern of the front panel, in addition to tuck, and apply to the contour of the hips. The bottom line extend to the left by 3-5 cm to the Left at the waist from the line of mid front cloth put the segment equal to 1/4 of the poluobhvat waist (in this case 9.5 cm) (Fig. 84). In the resulting point will begin the undercut pocket. From the hip line on the line side of the slice up and set aside 4-8 cm, and connect the obtained point with the beginning of podreza a smooth curve.


To the left from the beginning of podraza set aside 2.5–3 cm (tuck solution), and in line podraza — 13-14 cm (length tuck). Connect these points with a smooth curve, repeating the line podraza. Align the sides of the tuck.


From the beginning of podraza waist to the right set aside 3 cm, and from the end of podraza down the line side of the cut — 8-12 cm (size of burlap pocket). Number of items and mark on them the direction of the grain lines.


For sewing skirts with scoring pockets you will need two lengths of the product plus 15-20 cm, if the width of the fabric is 75-90 cm


With a width of 140 cm, you will be one length plus 20-25 cm


Transfer to a clean sheet of paper detail of the burlap pocket. Cut the pattern on the tuck and the pocket.


Fold the fabric lengthwise inside out and lay it on the pattern of the cloth back, and the first part of the pattern front cloth (means to bend). The second part, podraza combined with a third, lay in the direction of the grain lines (Fig. 85). Make allowances for seams and hemming the bottom. The third item is the burlap pocket — vykroyte from the main or lining fabric.


Route copy the seam along the contour lines of the patterns and the border between the second and third parts (podraza pocket). Mark the middle panels of the intermediate stitches. Sweeps the first component with the second third thus, to undercut them aligned.


Baste the Darts and the side sections. The seam on the left side to 16-20 cm should not reach the top of the slice. Baste belt.


Then slide the fitting and the presence of patches disperse the seams.


Treat the undercut pocket previously prepared in a burlap sack. If the fabric is easily stretched, hem edge along the line of Pedraza on the reverse side. Baste it cut to the cut of the pocket slanted stitches, spaced 1-1. 5 cm from each other. If the fabric is thick enough, you can pritchet edge. Attach the burlap pocket face to the front of the skirt, baste in the main part and sew a seam width of 0.8 cm and Then remove it on the front side.


Mimetite seam, making the edge of the main part (0.2 cm), prometeia and priutyuzhte. Then attrocity line podraza pocket, not reaching 2-3 cm to the waist line and side cut.


Along the lines of podraza sweeps the first and second third parts. Sew the edges of the third parts. Treat cuts burlap "zigzag." Similarly treat the second pocket. Further treat the product just like straight classic skirt.


This model is a good complement belt with a beautiful buckle.