The basis for drawing such a skirt, take the previous pattern. From the bottom to the ends of the Darts on the guide cut lines parallel to the middle of the front and rear panels (Fig. 76).

Extend Darts to the hip line, in this case, you will not need to increase the width of the skirt at the hips.

If you want to achieve a more casual fit, transfer the end of Darts at 3-4 cm above the hip line.

For sewing you'll need the same amount of fabric as for a straight duhovnoi skirt. Fold the material along the inside face and place the pattern front and rear panels, means to bend (Fig. 77). If you want to greatly extend the skirt down, lay the pattern askew at the waist line the middle should touch the fold of the fabric, and at the bottom, to defend him from 3-5 cm.
 

Fig. 76. Drawing style lines duhovnoi flared skirt

Cut the pattern so that the distance from the slit to the end of the pattern was 0.2 cm and Then close the tuck, so the patterns will move apart at the bottom line. Make allowances for seams and hemming the bottom.

Treat the product the same as the direct double seam skirt.
 

Fig. 77. Layout of patterns on fabric and cutting the flared skirt