The amount of fabric needed for a skirt with box pleats (Fig. 95) can be calculated in a similar way. But it should be noted that the width of the box pleat folds 2 times more unilateral.


Remove all the cloth. At a distance of 18-20 cm from upper edge, draw a line of the hips and points of note on it (from the inside) to the location of the folds. Step back from the edge of the fabric 1 cm (the seam allowance), put him 1/4 the depth of the folds, from the width folds, then the full depth, etc. are Done selecting 3/4 of the depth of the pleats and seam allowance of 1 cm.


Sew all the panels except the last seam. Sametime and hem the bottom, not reaching 8-10 cm to Nesmachnyi slices.


Reduce the depth of the folds along the hem of 1 cm on each side. Draw lines outside the fold creases from the points 1 cm through the marked on the hip line point.


Lay folds (first from the hip line to bottom, then from the hip line to waist), Sametime and priutyuzhte them.


Measure the width of the cloth at the waist. If she is more full of waist girth with the addition of free customized fit evenly balance the depth of each fold at the waist.


Then again Sametime pleats from waist line to the hip line. Further treat the product the same as circular skirt with accordion pleats.