For the costume size, you will need a thick cloth, viscose or cotton fabric length 250 cm width 150 cm adhesive fabric, lining fabric length 200 cm width 110 cm, 2 large and 8 small buttons for jacket and one for the skirt, zip length of 18 cm (Fig. 120).

Preparation of patterns

When sewing in this model, you can use ready-made templates. Lay the fabric on a flat surface, place patterns, obselete them and cut out the contours. The result is the following quantity of items:

Main fabric:

— medium back part — 2 details;
— the middle part of the right shelves — 1 item;
— the middle part of the left shelves — 1 item;
— side back part — 2 details;
— lateral part of the right shelves — 1 item;
— lateral part of the left shelves — 1 item;
— the upper part of sleeve — 2 details;
the lower part of sleeve — 2 details;
— upper collar — 1 detail a bend;
— lower collar — 2 details.
— the facing of the neck backless a — 1 folded detail;
— podbot left shelves — 1 item;
— podbot right shelves — 1 item;
— the facing of the bottom back — 2 pieces;
— facing the bottom-left shelves — 1 item;
— right facing bottom shelves — 1 item;
— pocket facing — 4 details;
frame pocket — 2 details;
— pocket valance — 2 details;
— the back half of the skirt — 1 detail-fold;
— the front half of the skirt — 1 detail;
belt — 1 detail;
the facing bottom back halves of the skirt — 1 detail-fold;
— the facing of the bottom front half of the skirt — 1 detail.

Lining fabric:

— back — 1 folded detail;
the left part of the shelves — 1 item;
— right side shelf — 1 item;
— the upper part of sleeve — 2 details;
the lower part of sleeve — 2 details;
lining 1 pocket — 2 details;
lining 2 pocket — 2 details;
— the back part of the skirt — 1 detail folded;
the front part of the skirt — 1 detail-fold.

Piping the neckline of the back, the middle part of the shelves to the line of inflection lapel, podbot from the line of inflection of the lapel to the middle of the shelves, hem and sleeves, areas around the arm openings and cut lines pockets, collars and belt skirt twin adhesive strip.

The processing sequence of the jacket

1. Sew Princess seams and Darts shelves, sweeps the cut of the pocket.

2. Treat the pocket in the frame: obtachku sew pocket with one part of pocket lining to the shelves on the planned lines, sew the second part of the piping and the pocket lining for the shelves, cut a hole for the pocket, remove the lining of the pockets on the wrong side of the shelves. Then sew the side sections of the lining of pockets, secure the ends of the slit, Topstitch finishing the frame around the entrance to the pocket, iron the side pockets.

3. Sew consistently sections of the reliefs of the back, shoulder sections, the middle sections of the back, the side sections, proutyuzhte.

4. Sew lower collar, seams Ratatouille. Sew the top and bottom collars, turn, press, attrocity.

5. Connect the collar with the neck: tacite lower collar into the neck, simultaneously grinding off podborta and obtachku neck backless top collar, seams Ratatouille. Sew the seams connecting the upper collar with podborany and facing to the seam joints of the lower collar with the neck.

6. Keen of podborta on the side of the shelves, stuite fit good the sides. Oblacite lapels and side shelves with a trained podborany, at the same time grinding off the corners at the bottom. Remove the sides and the lapels on the front side, straighten the corners of the lapels and the sides at the bottom, press, attrocity. Treat hem with obrazkami. Prometiste loop.

7. Processing of sleeves. Sew upper and lower sections of the sleeves, and priutyuzhte. Vacate sleeve in the armhole, propositiva on the crown and aligning the notch.

8. Sew the seams of the lining (seam margin 1cm), connect the lining with the main fabric, sew buttons.

The processing sequence of the skirt

1. Sew Darts into front and back halves of the skirt, zautyuzhte to the center.

2. Sew the side seams. Vsheyte zipper and handle obrazkami the bottom line.

3. Sew seams on lining, Sametime folds. The lining put in a skirt, folded it wrong sides of the skirt, baste the top slices. The lining on the slit for zipper, tuck and sew to zipper braid.

4. Fold belt in half lengthwise, clean witchita the short side and seam allowance under the zipper. The outer half of the fold belt to the skirt, right sides and pristrochite to the upper cut of the skirt, the inner half tuck and sew to the seam primaqiune.

The belt will attrocites in the region. Prometiste a loop for the button.

5. Treat the bottom of the product.