Currently, you can find a lot of pajamas – sets consisting of shorts, or pants and top. However, the majority of women falls on the classics of the genre – on the night of the magpies with a length below the knee. In principle, in purchasing a shirt to sleep no problem. It is also possible to make it myself! The only point to the choice of fabric and the proper style. For those ladies for whom such tailoring will be a new assignment, we present the description of cutting and sewing from scratch. For sewing nightgowns, we need: scissors, pattern, fabric, thread, needles, pins.

1. First, measure. We need to know the bust, and other measurements that allow us to be aware of the parameters of the future product. The volume of the chest priplyusuem addition to loose fit and seam. For freedom can hem to make a little wider. Using these values draw a rectangle that fold in half. It now remains to draw the silhouette of the shirt.
 

2. After applying the silhouette, attach to their cloth. It turns out that what you want? If not, adjust. And if positive, ready to take up the scissors! Cut away the excess fabric (don't forget seam and hem the bottom). Do not rush to throw cut lokotochki. They can be used for DIY, ornaments and for the manufacture of any utility. To sew a ruffle, for example, will come in handy a number of strips.
 

3. Now the most important thing! How to cut armhole without complicated design? Most likely, you have a t-shirt or camisole, which can be applied to the tissue and the contour cut around armhole. I hope you have noticed that we did not make special patterns? Again, all applied to myself and check. When a negative result is correct. If everything goes well, then cut out the armhole, not forgetting the seam.
 

It's time for the grinding of our products. First, sew the side seams. Then the treated arm openings and the neck. For the processing of the edge just sprained allowances and stitch. But for the fact that the product sat well on you, and the fabric is not bristled – it is better to use the bias tape or a facing.

4. Front, top, sew a small elastic band.
 

Estimated pin straps (made of cloth) and using a fitting, adjust their length. The remaining scraps of fabric can be used as a decoration of ruffle straps and hem. In an extreme case, if there is no desire to mess around the bottom of the nightdresses you can just bend and stitch. Nightgown ready! If you wish, in front you can decorate your creation with a bow of satin ribbon.
 

The fabric for these products it is advisable to choose natural. It will give you comfort and convenience during sleep and rest. For his first products do not take the best and expensive fabric. Practice on something old.

Fabric for shirt should choose natural, to make it comfortable enough. For a winter option it is quite useful to flannel. In the warm season, ideal for cotton. If you do nightgown, designed for cold winter, here is quite fine flannel. But in the summer you will be comfortable in cotton or Batiste nightgown. Dressed, sewn personally, you will dream beautiful dreams.

Consider another option is making nightgowns. To sew the product, the best option is to choose a soft cotton fabric. For this model we will need about half a meter of material. With the fabric was determined so you can get to cutting and sewing.

1. The first component of the pattern there will be two parts of rectangular shape. If we take half of the circumference of your chest and add two to three inches, we get the length of our parts. The height will take approximately twelve inches.

2. Every detail folded in half right side out and skalyvaniem on the long edge.

3. The second part will be to cut out the Central part, consisting of large rectangular piece. Width of your breast (bust), multiplied by 1.5, what is the width of the rectangle, and the height can be done 75 inches (length from bust to hem).

4. As our product is on the straps, then take for their production. Take two strips of fabric the width of 3 cm and length 45 cm. folded Billet inside face, attracive on the long edge, outlives the seam and turns the resulting product. Straps it makes sense to do and longer. Excess can always be trimmed.

5. Combine top and base web. As the center part of the much wider upper part, for their grinding need to prisborivat the lower part. Or just lay the folds. For pribivanija on the top slice of laid two lines at a distance of seven millimeters and contractible great detail. Grind to the underside of both parts, ironed the seam. Then, the resulting product fold inside out and laid another bead. It remains to sew the hem, and sew on straps. Our night shirts are ready!