For jacket you will need satin fabric with a length of 150 cm and a width of 150 cm (Fig. 117).

The pattern for this model is build using drawing-based. Put it on another sheet of paper and apply a contoured line and rounded edges. Don't forget to convert the Darts in the waist. The design of the collar is made according to the standard scheme. After the cutting of the jacket should be the following number of parts:

Main fabric:

a— frame pocket — 2 details;
— the back — 2 details;
— the facing of the neck backless a — 1 folded detail;
— shelf — 2 items;
— podbot — 2 parts;
sleeve — 2 details.

Backing cloth:

— lining sleeve — 2 details;
— lined interior with a back — 2 details;
— lined interior with shelves — 2 items;
— burlap pocket — 2 details.

Working with interlining: fasten gasket parts podborov, piping neck backless shelves.

Processing sequence

1. Sew Darts at the back and shelves, the middle seam of the back.

2. On the shelves, follow, and Welt pockets in the frame: the inner side of the shelf iron on top of the markup of the pocket strip fabric width of about 4 cm, the facing of the pocket fold with the shelf front sides, pin on a marking along the entrance of the pocket and sew along the markings of his pocket.

A shelf cut along between the lines in the middle, the ends of the lines obliquely. Allowances of seams Ratatouille. Obtachku remove through the grub on the wrong side to make a neat frame, and baste.

The burlap pocket on the reverse side of the shelf put it on the bottom facing, giving the burlap up, and with the front side facing the lower pristrochite the seam primaqiune, grabbing the burlap. Burlap zautyuzhte down.

The second section of burlap on the reverse side shelves put in the pocket and on the front side pristrochite in the seam of the upper piping primaqiune.

The small triangles at the ends of the grub screw off on the wrong side and pristrochite to obtachku exactly from the ends of the top line to the ends of the bottom. Sew open cuts neskowin.

3. Sew shoulder and side seams.

4. Sew shoulder seams of podborta and piping of the neck backless.

5. Podborta fold with shelves, right sides and pin the sections of the sides and neck, oblacite side podborany.

6. Hem the bottom of the jacket.

7. Treat the seams of the sleeves. Vacate sleeve in the armhole of the jacket, proposedin on the crown.

8. Sew the shoulder pads.

9. Sew the Darts on the lining of the back and shelves, stitch detail cut of lining fabric. Sew the lining to the lower sections of sleeves, the inner sections of podborov and the facing of the neckline backless. The lining hem.

10. On the right shelf sewn loop on the left ledge sew on buttons.