For jacket required suiting a length of 150 cm and a width of 150 cm

After the cutting of the jacket should be the following number of parts.

Main fabric:

a— frame bottom pocket — 4 details;
collar — 2 details;
— upper back part — 2 details;
— lower back — 2 details;
— the facing of the neck backless a — 1 folded detail;
— top of shelves — 2 items;
— the lower part of the shelves — 2 items;
— podbot — 2 parts;
— the upper part of sleeve — 2 details;
the lower part of sleeve — 2 details.

Lining:

— the lining of the upper part of sleeve — 2 details;
— lining the lower part of sleeve — 2 details;
— lining of the back — 2 details;
— lined interior with shelves — 2 parts;
— the upper part of the burlap pocket — 2 details;
the lower part of the pocket sacking — 2 details;
— supata facing — 2 details.

Working with interlining: fasten gasket parts podborov, piping neck backless shelves.

Processing sequence

1. Sew Darts at parts of the backrest and shelves, back panel and shelves between them, the middle seam of the back.

2. On the shelves, follow, and Welt pockets in the frame: the inner side of the shelf iron over the markings of the pocket lane strip width of about 4 cm with two piping pocket fold with the shelf front sides, pin on a marking along the entrance of the pocket and sew.

Note that longitudinal sections of obcutek coincides with the line marking the middle of the pocket. A shelf cut along between the lines, to the ends of the lines obliquely.

Allowances of seams Ratatouille. Remove the piping through the grub on the wrong side to make a neat frame, and baste.

The burlap pocket on the reverse side of the shelf put it on the bottom facing, giving the burlap up, and with the front side facing the lower pristrochite the seam primaqiune, grabbing the burlap. Burlap zautyuzhte down.

With tucked seam allowance of one of the long sides of the skirt, Topstitch the valance on the second burlap.

The second burlap on the reverse side shelves put in the pocket and on the front side pristrochite in the seam of the upper piping primaqiune. The small triangles at the ends of the grub screw off on the wrong side and pristrochite to obtachku exactly from the ends of the top line to the ends of the bottom. Burlap trim, equating, and sew.

3. Similarly treat the frame supatoy clasps on podborta.

4. Sew shoulder and side seams.

5. Podborta fold with shelves, right sides and pin the sections of the boards, oblacite side podborany. Sew shoulder seams of podborta and piping of the neck backless.

6. Collar witchita purely by the external circuit.

The lower collar vacate in the neck of the shirt, the upper collar to the neckline piping. Allowances of seams Ratatouille. Razoruzhenie allowances of seams vrachevanie the bottom of the collar and piping of the neck of the back stitch on the inside.

7. Hem the bottom of the jacket.

8. Run seams sleeves. Vacate sleeve in the armhole of the jacket, proposedin on the crown.

9. Sew the shoulder pads.

10. Stitch detail cut of lining fabric, tuck the lining back and the shelf. Sew the lining to the lower sections of sleeves, the inner sections of podborov and piping of the neck backless. The lining hem.

11. On the left ledge sew buttons.