Friday, 29.03.2024, 16:00
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » Women's clothing

Mini skirt with leather inserts

To complete this model you should use the denim and leather for the inserts. The front panel of this skirt is notched at the yoke, back — on straight. From the headlands of the yoke are decorated folds (Fig. 86).

On a clean sheet of paper draw a basic pattern front and rear cloth skirts.

Apply to the contours of the hips. Extend the front panel along the hem of 5-7 cm, and rear — 3-4 cm (Fig. 87).

Drawing back the cloth of the waist line on the line side of the slice set aside a period equal to half the distance from the waist line to the hip line. Is the width of the yoke. Set aside cut the same length on the line the middle of the back of the cloth and on the lines of the Darts. Connect the resulting points with a smooth curve.

In the drawing, front cloth along the lines of the mid and side cut put the same width of the yoke, and rear panel. With a ruler connect the points obtained. Divide this auxiliary line into 3 parts from points located closer to the middle, draw a vertical cutting line. In the line of incision 2-3 cm above the hip line put the end point of the Cape yoke.

Down from the auxiliary line through the middle of the front set aside 2 see Join the obtained point with the endpoint of the Cape yoke and yoke width marked on the side, smooth concave curves. It will be the lower section of a yoke.

Number of part patterns of the front and rear panels. Mark on them the direction of the grain lines.

For sewing skirts on the coquette is better to take a fabric width of 140 cm. In this case, you will need one length skirt plus 15-20 cm.
 


Fig. 87. Drawing style lines of the skirt to the yoke and back panel; — front panel


Cut the pattern along the lines of coquettes. Close tucks at the yoke, pre-extending tuck in the front part to the bottom of the slice. On the pattern front cloth make the cut.

Fold the fabric lengthwise face inward. Lay the pattern front and rear panels, means to bend. Pattern pieces the front piece of cloth spread on the hip line to the depth of the folds (the deep folds unilateral is 10-14 cm, depth counter — 20-24 cm) (Fig. 88).

We continue to the fabric through the hips. Then drag items and combine them to the main contour. Reduce the depth of folds along the hem of 1.5–2 cm on each side.
 


Fig. 88. Layout of patterns on fabric and cutting skirts on the yoke


Patterns yoke put on the fabric means to bend, closing the Darts. Give the seam and bending the bottom.

Run along the contour lines of the patterns and lines of the folds copying seam. Mark the middle of panels and yoke of the intermediate stitches. Baste pleats and side sections of the panels and yoke. The yoke keen on cloth so that their mid and side seams aligned.

Baste belt or grosgrain ribbons. Then check the fitting. If during the fitting was made fix, disperse the seams.

Sew right side seam of yoke, then Ratatouille seam. Treat the lower section of a yoke pre-prepared podkralas the facing. You can also bend it on the side, tack and priotity, and at the final stage to lay a finishing seam width of 0.2–0.5 cm. Sew right side sections of the panels. Keen yoke on the cloth (skirt needs to be in expanded form). This will ensure that copying the seam along the upper cut of the skirtaligned with the bent or machined bottom cut of the yoke. Topstitch the yoke on the cloth. Treat the zipper in left side seam and sew the slices.

The top of your skirt coat with belt. Hem the bottom, sewn sections and outwrite product.

 To make the skirt look more elegant, you can finish with rhinestones.



Category: Women's clothing | Added by: 17.10.2017
Views: 421 | Rating: 0.0/0

Total comments: 0
avatar