For sewing pants 46 size will require gabardine, 150 cm wide and 140 cm long, 1 zipper 20 cm long, 1 button, hard strip for belt (Fig. 104).

This model of pants can be cut on the basis of the drawing of the tribe need to make a strong extension.

After cutting the fabric you should have the following:

— rear half pants — 2 items;

— the front half of pants — 2 pieces;

— belt — 1 detail.

The processing sequence

1. Run side seams, leaving left seam open at the top of the plot for the zippers. Run the stepper seams. A single line run front and back middle seams.

2. Allowances under the zipper along sections zautyuzhte on the wrong side. Vacate the zipper inside the seam.

3. Connect the strip with the belt. Sew waistband to upper sections of the pants. At the rear edge of the cut leave allowance under the clasp. Belt on the half-width fold on the front side, the ends of pure witchita. The inner section of the belt and tuck the tab on the seam of primaqiune.

On the front end of the belt run the Welt loop. Accordingly, the location of the loops on the belt seam allowance sew a button.

4. Allowance for the bottom hem zautyuzhte on the wrong side and sew.

 Pants wide flare can be made of denim and complemented pockets.