For tailoring of trousers (Fig. 135) prepare the fabric with a length of 1.45 with a width of 1.5 m, or 2.5 m long with a width of 0.9 m, interlining N 250, one with a zipper 20 cm long, 2 buttons.

Prepared details of number patterns and place on the fabric (Fig. 136):

I — front half — 2 details;

II — lateral part of the front halves, one-piece with burlap pocket — 2 details;

III — back half — 2 details;

IV — the left part of the belt length 39.5 cm, 3 cm seam allowance under the zipper; right side belt length 36,5 cm, Both parts with a width of 12 cm, finished 6 cm;

V — burlap pocket — 2 details

Find details of trousers taking into account allowances for seams and the hem.

Without allowances cut side of the front halves along the edges marked "right side" and "left side".

Parts shaded in the plan layout, strengthen the gasket.

Witchita masculine the entrances to the pockets in the front halves. The seam allowances of the front pieces in the corners of nadsekite and then attrocites in the region at a distance of 0.75 cm Sew Darts on the side pieces. Put the front half on the side, aligning with the lines of the entrances to the pockets. Fold the front halves of trousers above the entrances to the pockets with the side pieces, right sides and sew with them from the first mark to cross. Then, without interrupting the lines, sew burlap pockets.

Lay pleats and sew from the wrong side of labels to the end folds. Zautyuzhte folds and attrocity from the front side along the seams to the edge at a distance of 0.75 cm Baste burlap pockets to the front half of the pants. Sew the side sections, and then sew step seams. Vsheyte the zipper and sew the waistband.

A little destrucive to the stepper seams, sew front middle seam. Zautyuzhte cap piping section, based on the corresponding bend lines on the wrong side. Sew the zipper to the seam allowance under the zipper. Position as its teeth closely to the bend. Cleave the slit. Pristrochite free zipper tape to the facing cap of the section, not grabbing the front halves of trousers.

Will attrocity the front half of the pants along the marked line. At the same time pristrochite cap obtachku. Sew belt detail to the upper cut of the pants. At the same leave allowance under the clasp protruding beyond the edge of the cut.

Fold belt detail trousers in half lengthwise and witchita short sections, and the allowance under the clasp. With tucked inner halves, sew the waistband to the seam of primaqiune. Stitch middle seam up to upper edge of the belt. Fold allowances on the hem to wrong side and sew with a double needle at the distance of 3 cm from the bend. Prometiste two loops at the waistband.