Pant suits is today an indispensable item in every woman's wardrobe.

The suit shown in figure 119 will be interested in the modern fashionistas. For the construction of the pattern, use the size model figure 46 -th size.

For tailoring of a suit will require suiting length of 310 cm and a width of 140 cm, fabric trim collar length 100 cm and width 150 cm, lining fabric length 150 cm and 140 cm wide, interlining N 180, spacer for belt, 1 zipper 20 cm long, 1 button suit, 2 buttons for jacket, shoulder pads.

Cutting fabric

Cut parts of the pattern from the prepared drawing -basics has been shaped lines. Number details and perform a layout of patterns on fabric. Vykroyte burlap pocket as a separate item.

After cutting you should have the following number of parts.

Pants:

— front half — 2 details;
— burlap pocket — 2 details;
a side portion of the front halves, cut together with burlap pocket — 2 details;
— the back half — 2 details;
the left part of the belt length 45 cm (3 cm allowance under the clasp), the right side of the belt with a length of 42 cm, each piece with a width of 6 cm, finished — 3 cm;
— loops for belt — 4 parts, each of length 5 cm and width 6 cm, ready — 3 cm

Jacket:

— shelf, tailored, along with the lower collar — 2 details;
— the back — 2 details;
a side part — 2 details;
— podbot single cut with upper collar — 2 details;
— upper part of sleeve — 2 details;
the lower part of sleeve — 2 details.

Make a seam 1.5 cm, hem — 4 cm Vykroyte without allowances of the front sides of the side portions of the front halves of the cut together with the burlap pocket.

Podborta strengthen the cushioning cloth. Additionally the gasket to the proutyuzhte allowances on the hem of the bottom of the side portions and parts of the back of the jacket.

Vykroyte lining pattern of the shelves (minus the width of podborta), back (middle fold and crease free fit depth 2 cm), side parts and sleeves with seam and hem 1.5 cm wide

processing Sequence

1. Start sewing pants with front of the front halves. Lay pleats on the front halves, and then Sametime and attrocity. Baste belt loops to upper sections of the front pants over pleats, and back over the seams of the Darts.

2. Vsheyte zipper, and then baste the waist. After trying on pants belt sew.

3. Sew front middle seam of the label cut down. Finish line a little higher before reaching the stepper seams. Zautyuzhte cap piping cut on the wrong side of the bend lines.

4. Is placed under the seam allowance of the cut braid and the zipper and pristrochite it. In this position the teeth closely to the bend. Cleave the slit. Free webbing zipper pin to the facing the other side of the slit and pristrochite, not grabbing the front half.

5. Will attrocity the front half along the marked line, taking obtachku.

6. Sew belt detail to the upper sections of the pants. Leave allowance under the clasp of the belt protruding beyond the edge of the seam allowance under the cut of the pants. Sew belt detail to the upper sections of the pants. Fold in half lengthwise and witchita front of the short side and seam allowance under the zipper. Tuck and sew the inner halves of the parts of the waistband to the seams primaqiune. Then sew the remaining nextchannel plot of the middle front seam to the upper edge of the belt. The line is not cut off and sew portion of the rear middle seam to the top of the belt.

7. Loosen up the belt loops, tuck and pristrochite to the upper edge of the belt. Mimetite on the belt loop for the button. Hem pants, Tutuila hands.

8. Tailoring of the jacket start with back. Sew middle seam of backs.

9. Sew the side pieces to the back and the shelves. Sew shoulder seams. Make crosscuts in the corners between the shoulder and cap of the lower collar. Vacate in the neck back of the lower collar. Fold podborta the jacket, right sides together and pin podborta and collar. Pure witchita the bottom of shelves, sides and collar.

10. Lay the back lower section of the upper collar over the seam of vrachevanie the bottom of the collar to the neckline of the back. Prostrochite on the front side of the jacket exactly in the seam of vrachevanie the bottom of the collar. The bottom sides and back hem. Sew podborta to the hem of the bottom side parts and to the shoulder seams.

11. Do the double seam sewing sleeves. First pripasayte sleeves on top part, and then vacate them into the openings. Sew the shoulder pads.

12. Connect the jacket with lining. On both shelves mimetite one loop for buttons. Sew buttons.