For this model (Fig. 133) prepare the following: denim — 1.15 m with a width of 1.5 m, 220 F interlining, buttons.

Cut parts of the pattern of the shirt from the drawing and apply a contoured line according to the rules of magazine design. Number the details of the patterns (Fig. 134):

I — front — 1 folded detail;

II — valve — 4 parts;

III — placket for zipper — 2 details fold;

IV — back — 1 folded detail;

V — yoke — 1 detail of the fold of lace fabric (cut out separately);

VI — collar — 2 details fold;

VII — sleeve — 2 details;

VIII — 2 pocket length 16.5 cm, width 15.5 cm;

IX — finishing strips of fabric, each with a length of 45 cm and a width of 5.5 cm

Vykroyte details taking into account allowances for seams and the hem. Cut straps for clasps have different cut lines for the right and left parts.

The lower edge of the planks finish with a scalloped inset of the canvas. Shaded in the drawing, the details strengthen the gasket.

Zautyuzhte on the wrong side of the allowances of the seams of the upper edges of the front and back. Pinhole on the front side of the yoke in front and back wrong sides and attrocites in the region at a distance of 1 cm.

Fold in half lengthwise right bar for clasps, witchita beveled lower end to the mark. The top end also witchita to the tag. Pure witchita left the bar only at the upper end. Sew the straps to longitudinal sections of the front. Make crosscuts obliquely into the lower corners of the allowances of the seams of the front. Zautyuzhte allowances of seams primaqiune straps.

The inner halves of the straps rolled for a shorter look, sew the seams. Will attrocity strap to the edge at a distance of 1 cm Pristrochite to the front lower end of the left strap. Put the left and right strap each other, combining their means. Topstitch the lower end of the strap to the edge at the marked lines.

Pure witchita collar on the outside. Vacate collar in the neck. Tuck the lower collar and sew it to the seam primaqiune. Will attrocity collar.

Tuck the upper margins of the pockets and pristrochite. Unscrew on the wrong side of the allowances of the other seams. Scribbled on the front pockets, pre-aligning them with the scribed lines. Pure witchita on the outside and attrocity valves. In the marked places pristrochite them to the front, zautyuzhte down and pristrochite again along the seam primaqiune in the region.

Sew the side sections of the above label sections. Unscrew on the wrong side of allowances on the hem and rolled for a shorter look, pristrochite on marked lines.

Sew the sleeves. Unscrew on the wrong side of allowances on the hem and baste. Baste straps, tucked them under the bottom edge of the sleeves so that they were on a 3 cm wide and Pristrochite strap from the front of the sleeves at the marked lines. Vacate sleeves. On the valves and on the right the strap for the clasp prometiste loop.

For the model fit pants and Capri pants made of light fabric.