The new beach season is approaching and every girl is thinking about choosing a stylish and beautiful swimsuit. This summer the most popular swimwear bandeau, which are represented in the collections of many designers. The name of the swimsuit purchased from the French word "bandeau" - "headband" and the translation fully reveals the essence of the swimsuit - bandeau. This kind of swimsuit is characterized by the fact that it completely lacks straps.

A huge plus style of this swimsuit – it is completely versatile for every girl. Many girls prefer this style, to get a nice tan. Sew the swimsuit-bandeau is possible in two variants: separate and piece. Piece swimsuit options are less popular, so today we are going to sew separate option.

Panties for this used swimsuit with low waist, which is important in every season, but overall the image looks quite obscene. This swimsuit is attached step-by-step building patterns.

You need to remember that fabric for a swimsuit can be very diverse: microfiber, Tactel, spandex and even polyester. It is very important that spandex is required to present in a swimsuit, as it adds more elasticity and prevent deformation. It is best to choose microfiber because the product from this material will look just fantastic. A suit from this fabric will cost you about as much, but the price is worth it. As it is not only a perfect sit on the figure, and will last a long time.
 

If you plan to sew a more economical option then you can buy polyester or lycra. And for sewing bottoms you can buy cotton knit.

When the fabric is purchased, you can safely proceed to the pattern making. First you need to measure the exact circumference of the chest in that place, and from the length subtract 15% for a stretch fabric. Now you need to measure the height of the chest – from under the chest through the exposed part to the top of the bodice. To the number add a couple of centimetres for Assembly.

Now draw the pattern, in the proper build you will help the finished circuit patterns, for self-sewing of swimsuit - bandeau. Remember that on the back strip of the bodice should be getting already, but that too depends solely on your desire. First you need to sew the side seams, and after that carefully treat the upper and lower edge. Also, if you wish, you can make full-cut bodice without side seams. Typically, the closure strapless bodice bandeau is done at the front. Options can be very different.Also options of zippers, there is a huge amount that can be purchased in the store for sewing.
 

You need to make a pattern for swimsuit bottoms. Decide on the height of the panties front and back and on the top line, measure the expected girth. Received the inches of circumference should be divided into the front and back. Now make the pattern. It is very important not to forget in the upper areas of the neck to the feet leave seven millimetres for the undercut, and the sides, one centimeter to the scenes.

For starters, using a sewing machine zig-zag stitching of three millimeters, with elastic thread, handle top edge and the cutouts for the legs. Elastic thread should be used only in the bobbin, but the top thread should be normal. Then, with a light tension you need to lay the elastic on top of it you also need to handle elastic thread or zigzag stitching. Now sew the wings, it is useful to attach decorative elements. If you decide to use a narrow buckle for decoration, then sew the scenes do not need.

Ready to decorate the swimsuit in various ways. So, from the main fabric can be twisted into little roses and sew them to the bodice and bottoms. Definitely nice to look at a beautiful brooch at center bodice, which will be according to the style approach to the General pattern of the swimsuit. You can also make original embroidery of beads and sequins.

If you are fond of good tan then swimsuit bandeau just for you and we can start sewing!