For jumpsuit (Fig. 107) you will need a costume or any other dense fabric with a length of 230 cm and a width of 150 cm, lining fabric in a cage (lining the top of the bib), 2 buttons, 2 carbine, without peg, 1 zipper.

The pattern of this hat is very similar to the previous model: align the patterns of the front and rear halves of trousers with patterns of shelves and backs.

After the cutting of the bib should be the following number of parts.

Main fabric

— front half pants — 2 items;
— the rear half of the pants — 2 items;
— back — 1 folded detail;
— shelf — 2 pieces;
— short / — 4 parts;
— belt loops — 3 details.

Lining fabric:

— back — 1 folded detail;
— shelf — 1 item folded.

Processing sequence

1. Lay pleats on the front halves in accordance with the direction of the arrows and Sametime them.

2. The straps are purely witchita and attrocity for purely vaticanum the edges in the edge at 0.7 cm

sew Straps to the back.

3. Back pure witchita lining for the upper sections.

4. Sew Darts at back halves.

5. Stitch middle front seam below the markup closure and Central back seam, not reaching 5 cm to the plotted lines of the stepper seams.

6. Belt loops, fold in half lengthwise, clean witchita and attrocity. Baste the belt loops to the pants front over is folded back over the rear middle seam.

7. Details of shelves sew to the front halves, back — to-back.

8. Belt loops, tuck and sew to the belt.

9. Lining shelves face fold with face shelves of the hat, between the lining and shelves attach with a zipper. The sides of the hat purely witchita lining, at the same time vracheva zip.

Will attrocity side from the front side of the bib at a distance of 0.1–0.2 cm from the seam and at a distance of 0.7 cm

Front and rear halves of the hat will attrocity along the upper edges of the edge at 0.7 cm

10. Sew side seams and stepper, the remaining portion of the middle seam.

11. Allowance for the bottom hem fold on the wrong side, tuck and pristrochite on a distance of 3 cm.

12. On the shelf sew two buttons, straps insert in the carabiner, adjust the length and lock. The clasp is sewn loops and sew buttons.