For sewing this blouse (46th in size) will require a viscose crepe, rayon or another lightweight fabric with a length of 180 cm and 140 cm wide, 10 buttons, adhesive fabric with a length of 20 cm and a width of 90 cm (Fig. 110).

Lay the fabric on a clean, flat surface and place the details of the pattern. As drawing for blouses, use a drawing -based.

After cutting the main parts of shelves and back proceed to the construction of the collar.

To perform the drawing of collar and tie a simple knot in the front, can be cut from a fabric rectangle with a width of 15 cm and a length equal to the length of the neck.

Then make a pattern of the ends of the collar attach to the basic pattern or the cut out rectangle.

Stitch collar finished at the distance 1-1,5 cm from mid front on each side.

Don't forget when abelove patterns leave room for allowances. After cutting the fabric you should have the following number of parts.

Main fabric:

— back — 1 folded detail;
— shelf — 2 items;
— the sleeve — 2 details;
collar — 1 folded detail;
cuff — 2 details;
strip cut sleeve — 2 details;
— podbot — 2 details.

Adhesive fabric:

— podbot — 2 parts;
cuff — 2 details.

Processing sequence

1. Sew shoulder and side seams.

2. Allowances on the hem of the bottom tuck on the wrong side and pristrochite.

3. Treat the soft parts of the collar fold on the planned line, right sides inside and sew along the short cut, at the same time primativa them hanging loop.

The line will continue to nasechek vrachevanie the collar to the neckline. The collar will attrocity along short sections.

4. Vacate collar in the neck, at the same time primativa podbot.

5. Handle sleeve: the sleeve is cut along the planned line, fold with strap and sew so that the distance between the lines does not exceed 1 see remove the Bar on the wrong side and rolled for a shorter look, sew with the wrong side of the sleeve to the seam of primaqiune.

The edging of the cut sew from the wrong side of the sleeve diagonally.

Sew seams sleeves. At the lower shear sleeve will lay the folds on the planned lines and Sametime.

7. Treatment of bottom of sleeves cuffs: on the front side of the cut edging fold on the wrong side and baste at the bottom of the cut sleeves. One of the longitudinal sections of the cuff sew the front side to the lower shear sleeve. Fold cuff in half lengthwise and witchita short side. The inner halves of the cuffs, tuck and sew to the seam primaqiune. Cuff attrocites in the region.

8. Vacate sleeve in the armhole.

9. Prometiste loop and sew fabric buttons.