For tailoring the model (Fig. 109) you will need a thin cloth with a length of 100 cm and 150 cm wide Fabric, place on a flat surface, lay out patterns and obselete.

When making this model, you can use the basic patterns. You should have the following number of parts:

— half-belt — 2 details;
collar — 2 details;
— Central back part — 2 details;
— side back part — 2 details;
— lateral shelves — 2 items;
— the facing of the neck backless a — 1 detail-fold;
— the Central part of the shelf — 2 items;
— podbot — 2 details.

Reinforce interlining details podborov, piping neck backless;

— the adhesive facing of the neck backless a — 1 folded detail;
— adhesive podborta — 2 details.

Processing sequence

1. Pure witchita tab along the long sides, turn and press. Make finishing line at a distance of 0.5 cm

2. Run average and raised seams of the backrest by inserting the tab in them.

3. Sew Princess seams of the shelves.

4. Sew shoulder and side seams.

5. Podborta fold with shelves, right sides and pin the sections of the boards, oblacite side podborany. Sew shoulder seams of podborta and piping of the neck backless.

6. Collar witchita purely by the external circuit. The lower collar vacate in the neck of the blouse, the collar vacate in the neck piping.

Allowances of seams Ratatouille. Razoruzhenie allowances of seams vrachevanie the bottom of the collar and piping of the neck of the back stitch on the inside.

7. The blouse hem. Podborta sew to hem the bottom.

8. The blouse will attrocity along the sides and collar for a distance 0.5 cm.

9. On the right shelf sewn loop on the left-hand sew buttons.

10. Sew the shoulder pads.