This model is characterized by smooth lines, which allows you to emphasize strengths and hide figure flaws (Fig. 122).

Create a style

Apply a contoured line on the basis of drawing patterns. Apply to drawing the line of side seam to mid armhole.

Extend the back and front at the points P2 and P3 on 1-1,5 cm and get the points P11 and P12. Optionally, you can increase or decrease the leg length by 2-3 cm

in the simulation back into the drawing -based apply new lines and points by description. Start with cut gate.

From point A measure down 1-2 cm and place the point C. From the point A4 to the right of the line of inclination of the shoulder put 4-6 cm and place the point C2. Connect C1 and C2 smooth concave line.

To draw an oval relief start point P2. To do this, measure the armhole up 1-2 cm and place the point P9. The resulting point connect with the top tuck of the back line and divide it in half. Measure perpendicular from the dividing point to the left 2 cm and mark the newly received point letter R. Connect the top of the Darts in the back, with points P and P9.

Continue the line mid-tuck with a dotted line to the bottom line and set point N. From this point, measure left and right 4-6 cm for expansion skirt hem. Label these points H7 and H8, and connect them with the top of the Darts in the skirt with straight lines. For this model, extend the side seam of the back hem from the point H4 to the right by 2-6 cm and mark point H5. The resulting point connect point B4 in a straight line.

When you build the front half of the dress start drawing shaped lines with registration of the cut gate. Measure from the point A7 down 2-3 cm and place the point C3. Measure along the line of inclination of the shoulder from the point A6 to the left of 4-6 cm and mark the resulting point C4.

Connect the points C3 and C4 of concave line. Continuing the development of the model for this line from point C3, measure 1 cm to the left and put a point C5. From C5, measure down 5-6 cm and mark the point S6. Then through the points C4, C5 and C6 make the cut gate. Tuck should be closed.

For the application of the relief lines on the shelf from point P3 measure up through the openings 3 cm and get the point a10. This point connect with the top inframammary tuck the dotted line.

Divide this line in half. From the points of division perpendicular to the right, measure 3 cm and place the point P1. Then connect the top of the inframammary tuck with points P1 and P10.

This line will continue to line the openings, and short sleeves.

The line of the same mid-inframammary tuck will continue to hem the dotted line and put the point H1.

From the point H1 to extend the front and the sides are 2-3 cm at the bottom line. All the dots connect with the top tucks skirt straight lines. Extend the side seam of the front, from point N3 along the hem of the left put 2-6 cm and place the point h6, connect it with the point B3 with a straight line.

Move the top of the chest Darts to the line shaped line without changing the level and depth of chest Darts. Make a new tuck through C1 and points A11 and A12.

Do not move the relief line from the center of the breast is greater than 2 cm otherwise bulge for the chest, formed on the pattern, a tuck, move.

Cutting

In the final drawing, number the pattern pieces from left to right. For a more accurate connection details for the the oval lines, and on lines, waist and hips draw the line of control.

Cut the pattern along the contours and contoured lines.

Close the 4 th pin tuck. In this case, it goes into the armhole. Lay in the drawing, the principal parts so that vertical line patterns formed on the lobe filament, and the horizontal on the cross.

Processing sequence

1. Start sewing with the implementation of the relief lines back and front. Along the dotted lines to cleave the middle of the details with side. It sweeps a vertical line at the middle details, stitch along the side. The joints fold in the side parts.

2. Baste and sew the shoulder seams of the dress and the seams obrazek separately. All seams Ratatouille.

3. Baste and then sew the side seams. Asutuste them.

4. Treat armholes as well as neckline. Fold the bottom of the dress and hem it.