Sew this model of trousers (Fig. 105) you will need a fabric length of 145 cm and a width of 150 cm or 250 cm length and 90 cm wide, woven N 250, 1 zipper 20 cm long, 2 buttons.

Layout of patterns on fabric

Prepared with details of patterns number and place on the fabric.

You should have the following:

— front half — 2 details;
— burlap pocket — 2 details;
a side portion of the front halves, cap with pocket sacking — 2 details;
— the back half — 2 details;
the left part of the belt length 39.5 cm, 3 cm seam allowance under the zipper. The right part of the belt length 36,5 cm, Both parts with a width of 12 cm, finished 6 cm

Vykroyte details of trousers taking into account allowances for seams and the hem. Without allowances cut side of the front halves. Belt detail strengthen interlining.

Processing sequence

1. Pure witchita masculine the entrances to the pockets in the front halves.

2. The seam allowances of the front pieces in the corners of nadsekite and then attrocites in the region at a distance of 0.75 cm Sew Darts on the side pieces. Put the front half on the side, aligning with the lines of the entrances to the pockets. Fold the front halves of trousers above the entrances to the pockets with the side pieces, right sides and sew from the first mark to cross mark. Then, without interrupting the lines, sew burlap pockets.

3. Lay pleats and sew from the wrong side of labels to the end folds. Zautyuzhte folds and attrocity from the front side along the seams to the edge at a distance of 0.75 cm Baste burlap pockets to the front half of the pants. Sew the side sections, and then the stepper seams.

4. Complete the zip closure and waistband. A little destrucive to the stepper seams, sew front middle seam. Zautyuzhte cap piping section, based on the corresponding bend lines on the wrong side. Sew the zipper to the seam allowance under the zipper. Place the zipper teeth closely to the bend. Cleave the slit. Pristrochite free zipper tape to the facing cap of the section, not grabbing the front half of the pants.

5. Will attrocity the front half of the pants along the marked line. At the same time pristrochite cap obtachku. Sew belt detail to the upper cut of the pants. Leave allowance under the clasp protruding beyond the edge of the cut.

6. Fold belt detail trousers in half lengthwise and clean witchita short sections, and the allowance under the clasp. With tucked inner halves, sew the waistband to the seam of primaqiune. Stitch middle seam up to upper edge of the belt.

7. Fold allowances on the hem to wrong side and sew with a double needle at the distance of 3 cm from the bend. Prometiste two loops at the waistband.

The perfect addition to this model is a blouse of light fabric or translucent tunic.