For sewing this model will need len length of 180 cm and 140 cm wide, 4 buttons, interlining length 40 cm and width 90 cm (Fig. 113).

The pattern for this model is based on the pattern classic blouse, just tuck into a line of openings. After cutting the fabric you should have the following number of parts.

Main fabric:

— shelf with cap sleeves — 2 items;
— the middle back part — 1 detail-fold;
— lateral portion of the back, with cap sleeves — 2 items;
— podbot — 2 items;
— facing side of the neck — 2 pieces;
— snap-tab — 4 parts.

Backing cloth:

— shelf with cap sleeves — 2 items;
— the middle back part — 1 detail-fold;
— side part of the backrest with a one-piece sleeve — 2 details.

Adhesive fabric:

— podbot — 2 items;
— facing side of the neck — 2 parts.

Processing sequence

1. On the shelves sew Darts.

2. Treat tabs: details of straps fold the right sides and witchita on the outside, leaving short, straight side open. Further, the tabs will attrocites in the region.

Open short cuts to baste the side sections of the middle part of the backrest according to the planned lines.

Then, the tabs overlap each other and staple, sew a button.

3. Shift the facing of middle part of the backrest Unscrew the wrong side and zautyuzhte. The fold line will attrocity.

4. Sew the side and the middle part of the back. Zautyuzhte allowances at the side seams. Sew shoulder seams and without interrupting the stitching, top, side and bottom seams of the sleeves.

5. Piping the lateral parts of the neck sew podborta shelves. The neckline and side witchita obrazkami and podborany. The protruding sections of obcutek on the neck of the back tuck on the wrong side and sew to the cap facing the middle part of the back.

6. Allowances on the hem bottom and sleeves remove on the wrong side zautyuzhte, tuck and pristrochite.

7. The lower short side of podborov shelves sew to the hem. The neckline and side attrocity.

8. Sew buttons and loops prometiste.