Sew a straight blouses with long sleeve, you will need viscose crepe with a length of 180 cm and 140 cm wide, 10 buttons, adhesive fabric with a length of 20 cm and a width of 90 cm (Fig.111).

As patterns use drawing-based.

After cutting the fabric you should have the following number of parts.

Main fabric:

— back — 1 folded detail;
— shelf — 2 items;
— the sleeve — 2 details;
collar — 2 details fold;
cuff — 2 details;
strip cut sleeve — 2 details.

Adhesive fabric:

collar — 1 detail-fold;
— the cap podbot — 2 parts;
cuff — 2 details.

The processing sequence

1. Sew shoulder and side seams of the cut line.

2. Allowances on the hem tuck on the wrong side and pristrochite.

3. Allowances cuts open the wrong side along the fold, zautyuzhte, sew to the hem. The hem and the cuts will attrocites in the region.

4. The front sections of the blouse fold on the fold line on the wrong side and priutyuzhte. Piece of podborta remove the shelves on the front side and witchita their neck to the notch. Podborta turn on the wrong side. The underside of podborov sew to the hem. Sametime the upper short side of podborov.

5. Treat the soft parts of the collar fold right sides and witchita external slices.

The lower part of the collar on the front side tacite in the neck, the upper part of the tuck and sew to the seam vrachevanie collar. The collar will attrocity along the seam vrachevanie. The outer and front sides of the collar will attrocites in the region.

6. Handle sleeve: the sleeve is cut along the planned line, fold with strap and sew so that the distance between the lines does not exceed 1 see remove the Bar on the wrong side and rolled for a shorter look, sew with the wrong side of the sleeve to the seam of primaqiune.

The edging of the cut sew from the wrong side of the sleeve diagonally. Sew seams sleeves. At the lower shear sleeve will lay the folds on the planned lines and Sametime.

7. Treatment of bottom of sleeves cuffs: on the front side of the cut edging fold on the wrong side and baste at the bottom of the cut sleeves. One of the longitudinal sections of the cuff sew the front side to the lower shear sleeve.

Fold cuff in half lengthwise and witchita short side. The inner halves of the cuffs, tuck and sew to the seam primaqiune. Cuff attrocity.

8. Vacate sleeve in the armhole.

9. Prometiste loops and sew buttons.